No abstract

Modifying physicochemical properties of aqueous surfactant solutions in favorable fashion by addition of environmentally benign room-temperature ionic liquids (ILs) has enormous future potential. Due to its unusual properties, an IL may demonstrate a unique role in altering the properties of aqueous surfactant solutions. Changes in the properties of aqueous sodium dodecyl sulfate (SDS), an anionic surfactant, upon addition of a common and popular "hydrophilic" ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4] are presented. Addition of low concentrations of [bmim][BF4] (i.e.,

Modification of important physicochemical properties of aqueous surfactant solutions can be achieved by addition of environmentally benign room temperature ionic liquids (ILs). While low aqueous solubility of "hydrophobic" ILs limits the amount of IL that may be added to achieve desired changes in the physicochemical properties, hydrophilic ILs do not have such restrictions associated to them. Alterations in the key physicochemical properties of aqueous solutions of a common nonionic surfactant Triton X-100 (TX100) on addition of up to 30 wt % hydrophilic IL 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) are reported. The presence of micellar aggregates in as high as 30 wt % [bmim][BF4]-added aqueous TX100 solutions is established by dynamic light scattering and fluorescence probe behavior. Increasing the concentration of [bmim][BF4] results in decrease in average micellar size and aggregation number and increase in critical micelle concentration, indicating an overall unfavorable aggregation process. Increase in the dipolarity and the microfluidity of the probe cybotactic region within the palisade layer of the micellar phase upon [bmim][BF4] addition implies increased water penetration and the possibility of TX100-[bmim][BF4] interactions. While the changes in some of the physicochemical properties indicate the role of [bmim][BF4] to be similar to a cosurfactant, the IL acts like a cosolvent as far as changes in other properties are concerned. Effectiveness of IL [bmim][BF4] in modifying physicochemical properties of aqueous TX100 is demonstrated.

No abstract

Modifying properties of aqueous surfactant solutions by addition of external additives is an important area of research. Unusual properties of ionic liquids (ILs) make them ideal candidates for this purpose. Changes in important physicochemical properties of aqueous zwitterionic N-dodecyl- N, N-dimethyl-3-ammonio-1-propanesulfonate (SB-12) surfactant solution upon addition of hydrophilic IL 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF 4], are reported. Dynamic light scattering results indicate a dramatic reduction in the average micellar size in the presence of [bmim][BF 4]; micellar (or micelle-like) aggregation in the presence of as high as 30 wt % [bmim][BF 4] is confirmed. Responses from fluorescence probes are used to obtain critical micelle concentration (cmc), aggregation number ( N agg), and dipolarity and microfluidity of the micellar pseudophase of aqueous SB-12 in the presence of [bmim][BF 4]. In general, increasing the amount of [bmim][BF 4] to 30 wt % results in decrease in N agg and increase in cmc. Increase in the dipolarity and the microfluidity of the probe cybotactic region within the micellar pseudophase is observed on increasing [bmim][BF 4] concentration in the solution. It is attributed to increased water penetration into the micellar pseudophase as [bmim][BF 4] is added to aqueous SB-12. It is proposed that IL [bmim][BF 4] behaves similar to an electrolyte and/or a cosurfactant when present at low concentrations and as a polar cosolvent when present at high concentrations. Electrostatic attraction between cation of IL and anion of zwitterion, and anion of IL and cation of zwitterion at low concentrations of [bmim][BF 4] is evoked to explain the observed changes. Presence of IL as cosolvent appears to reduce the efficiency of micellization process by reducing the hydrophobic effect.

Spectroscopic responses of absorbance probes, betaine dye 33, N,N-diethyl-4-nitroaniline, and 4-nitroaniline, and fluorescence dipolarity probes, pyrene (Py) and pyrene-1-carboxaldehyde (PyCHO) within ionic liquids (ILs) 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]), and aqueous mixtures of [bmim][BF4] are used to assess the changes in important physicochemical properties with temperature in the range 10-90 degrees C. ETN obtained from betaine dye 33, indicating dipolarity/polarizability and/or hydrogen bond donating (HBD) acidity, decreases linearly with increasing temperature within the two ILs. Changes in Kamlet-Taft parameters dipolarity/polarizability (pi*), HBD acidity (alpha), and HB accepting (HBA) basicity (beta) with temperature show interesting trends. While pi* and alpha decrease linearly with increasing temperature within the two ILs, beta appears to be independent of the temperature. Similar to ETNand pi*, the first-to-third band intensity ratio of probe Py also decreases linearly with increasing temperature within the ILs. The lowest energy fluorescence maxima of PyCHO, though it decreases significantly within water as the temperature is increased from 10 to 90 degrees C, it does not change within the two ILs investigated. The temperature dependence of the dipolarity/polarizability as manifested via betaine dye 33 behavior is found to be more within the aqueous mixtures of [bmim][BF4] as compared to that within neat [bmim][BF4] or neat water. The sensitivity of pi* toward temperature increases as IL is added to water and that of alpha decreases. The temperature dependent Py behavior shows no clear-cut trend within aqueous mixtures of [bmim][BF4]; insensitivity of the PyCHO response toward temperature change is reasserted within aqueous IL mixtures. All-in-all, the temperature-dependent behavior of solvatochromic probes within [bmim][PF6], [bmim][BF4], and aqueous mixtures of [bmim][BF4] is found to depend on the identity of the probe.

Understanding the effect of external additives on the properties of aqueous surfactant solutions is of utmost importance due to widespread applications of surfactant-based systems. Role of ionic liquids (ILs) in this regard may turn out to be crucial as these substances are known to possess unusual properties. To unambiguously understand and establish the role of ILs in modifying properties of aqueous surfactant systems, changes in the physicochemical properties of aqueous cetyltrimethylammonium bromide (CTAB) upon addition of an IL 1-hexyl-3-methylimidazolium bromide ([hmim][Br]) are compared with those when a cosurfactant n-hexyltrimethylammonium bromide (HeTAB) is added to aqueous CTAB. Important physicochemical properties, such as critical micelle concentration (cmc), aggregation number (N(agg)), solution conductance and microfluidity, and average aggregate size and polydispersity, are observed to change as either [hmim][Br] or HeTAB is added to aqueous CTAB; the experimental outcomes clearly imply the changes in most of the physicochemical properties to be significantly more dramatic in case of IL [hmim][Br] addition. The fact that, between the two, only IL [hmim][Br] may show cosolvent-type behavior at high concentrations is evoked to explain the differences in the behavior of the two additives. It is demonstrated that both [hmim][Br] and HeTAB show electrolytic as well as cosurfactant-type behavior within aqueous CTAB when present at low concentrations, with the changes in physicochemical properties being very similar. At high concentrations, although HeTAB still acts as a cosurfactant forming mixed micelles with CTAB, IL [hmim][Br] behaves partly as a cosolvent toward altering the physicochemical properties of aqueous CTAB. The unique role of IL in changing properties of aqueous surfactant systems is demonstrated.

Physicochemical properties of aqueous micellar solutions may change in the presence of ionic liquids (ILs). Micelles help to increase the aqueous solubility of ILs. The average size of the micellar aggregates within aqueous sodium dodecylbenzene sulfonate (SDBS) is observed by dynamic light scattering (DLS) and transmission electron microscopy (TEM) to increase in a sudden and drastic fashion as the IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) is added. Similar addition of [bmim][PF(6)] to aqueous sodium dodecyl sulfate (SDS) results in only a slow gradual increase in average aggregate size. While addition of the IL [bmim][BF(4)] also gives rise to sudden aggregate size enhancement within aqueous SDBS, the IL 1-ethyl-3-methylimidazolium tetrafluoroborate ([emim][BF(4)]), and inorganic salts NaPF(6) and NaBF(4), only gradually increase the assembly size upon their addition. Bulk dynamic viscosity, microviscosity, dipolarity (indicated by the fluorescent reporter pyrene), zeta potential, and electrical conductance measurements were taken to gain insight into this unusual size enhancement. It is proposed that bmim(+) cations of the IL undergo Coulombic attractive interactions with anionic headgroups at the micellar surface at all [bmim][PF(6)] concentrations in aqueous SDS; in aqueous SDBS, beyond a critical IL concentration, bmim(+) becomes involved in cation-π interaction with the phenyl moiety of SDBS within micellar aggregates with the butyl group aligned along the alkyl chain of the surfactant. This relocation of bmim(+) results in an unprecedented size increase in micellar aggregates. Aromaticity of the IL cation alongside the presence of sufficiently aliphatic (butyl or longer) alkyl chains on the IL appear to be essential for this dramatic critical expansion in self-assembly dimensions within aqueous SDBS.