Flexible sensing tends to be widely exploited in the process of human–computer interactions of intelligent robots for its contact compliance and environmental adaptability. A novel flexible capacitive tactile sensor was proposed for multi-directional force sensing, which is based on carbon black/polydimethylsiloxane (PDMS) composite dielectric layer and upper and lower electrodes of carbon nanotubes/polydimethylsiloxane (CNTs/PDMS) composite layer. By changing the ratio of carbon black, the dielectric constant of carbon black/PDMS composite layer increases at 4 wt%, and then decreases, which was explained according to the percolation theory of the conductive particles in the polymer matrix. Mathematical model of force and capacitance variance was established, which can be used to predict the value of the applied force. Then, the prototype with carbon black/PDMS composite dielectric layer was fabricated and characterized. SEM observation was conducted and a ratio was introduced in the composites material design. It was concluded that the dielectric constant of carbon sensor can reach 0.1 N within 50 N in normal direction and 0.2 N in 0–10 N in tangential direction with good stability. Finally, the multi-directional force results were obtained. Compared with the individual directional force results, the output capacitance value of multi-directional force was lower, which indicated the amplitude decrease in capacity change in the normal and tangential direction. This might be caused by the deformation distribution in the normal and tangential direction under multi-directional force.
In order to assist patients with finger rehabilitation training and grasping objects, we propose a new type of soft rehabilitation gloves (SRGs), which has both flexion/extension and abduction/adduction movement function for every finger. This paper describes the structure design of the bending actuator and rotating actuator, the fabrication process of the soft actuator, and the implementation of the soft wearable gloves based on a fabric glove. FEM simulation analysis and experiments were conducted to characterize the mechanical behavior and performance of the soft glove in terms of the angle output and force output upon pressurization. To operate this soft wearable glove, we designed the hardware system for SRGs with a flexible strain sensor and force sensor in the loop and introduced a force/position hybrid PID control algorithm to regulate the pressure inputted. Experiment evaluation focused on rehabilitation training gestures; motions and the precise grasping assistance function were executed. The rotating actuator between each finger can supply abduction/adduction motion manner for patients, which will improve rehabilitation effect. The experimental results demonstrated that the developed SRGs have the potential to improve hand movement freedom and the range of grasping successfully.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.