Miscanthus is a genus of high‐yielding perennial rhizomatous grasses with C4 photosynthesis. Extensive field trials of Miscanthus spp. biomass production in Europe during the past decade have shown several limitations of the most widely planted clone, M. × giganteus Greef et Deu. A 3‐yr study was conducted at five sites in Europe (Sweden, Denmark, England, Germany, and Portugal) to evaluate adaptation and biomass production potential of four acquisitions of M. × giganteus (No. 1–4) and 11 other genotypes, including M. sacchariflorus (Maxim.) Benth. (No. 5), M. sinensis Andersson (No. 11–15), and hybrids (No. 6–10). At each site, three randomized blocks containing a 5‐ by 5‐m plot of each genotype were established (except in Portugal where there were two blocks) with micropropagated plants at 2 plants m−2. In Sweden and Denmark, only M. sinensis and its hybrids satisfactorily survived the first winter following planting. Mean annual yields across all sites for all surviving genotypes increased each year from 2 t ha−1 dry matter following the first year of growth to 9 and 18 t ha−1 following the second and third year, respectively. Highest autumn yields at sites in Sweden, Denmark, England, and Germany were 24.7 (M. sinensis hybrid no. 8), 18.2 (M. sinensis hybrid no. 10), 18.7 (M. × giganteus no. 3), and 29.1 t ha−1 (M. × giganteus no. 4), respectively. In Portugal, where irrigation was used, the top‐yielding genotype produced 40.9 t ha−1 dry matter (M. sinensis hybrid no. 7). Highest‐yielding genotypes in Sweden and Denmark were among the lowest yielding in Portugal and Germany, demonstrating strong genotype × environment interactions.

The reasons for these requirements can be summarized as follows. Biomass with moisture contents below Miscanthus spp. are high-yielding perennial C 4 grasses, native to 200 to 250 g kg Ϫ1 fresh matter can be stored safely Asia, that are being investigated in Europe as potential biofuels. Production of economically viable solid biofuel must combine high without the danger of self ignition (Clausen, 1994) and biomass yields with good combustion qualities. Good biomass com-burns more efficiently while ash lowers the heating value bustion quality depends on minimizing moisture, ash, K, chloride, N, of the biomass and causes slagging of the boiler heat and S. To this end, field trials at five sites in Europe from Sweden exchangers (Hartmann et al., 1999). High levels of K to Portugal were planted with 15 different genotypes including M. ϫ are undesirable because it decreases the ash melting giganteus, M. sacchariflorus, M. sinensis, and newly bred M. sinensis point, but critical levels will depend on combustion techhybrids. Yield and combustion quality at an autumn and a late winter/ nique. Chloride can lead to corrosion through reaction early spring harvest were determined in the third year after planting with water to form HCl or with K to form gaseous when the stands had reached maturity. As expected, delaying the KCl, both of which are corrosive and reduce boiler life harvest by three to four months improved the combustion quality of (Baumbach et al., 1997). Furthermore, high chloride all genotypes by reducing ash (from 40 to 25 g kg Ϫ1 dry matter), K (from 9 to 4 g kg Ϫ1 dry matter), chloride (from 4 to 1 g kg Ϫ1 dry concentrations can lead to emissions of dioxine and matter), N (from 5 to 4 g kg Ϫ1 dry matter), and moisture (from furane (Siegle and Spliethoff, 1999). Nitrogen concen-564 to 291 g kg Ϫ1 fresh matter). However, the delayed harvest also trations in biofuels need to be as low as possible to decreased mean biomass yields from 17 to 14 t ha Ϫ1 . There is a strong minimize fertilizer off-takes and to reduce emissions interaction among yield, quality, and site growing conditions. Results of NO x during combustion. To avoid SO 2 emissions, show that in northern regions of Europe, M. sinensis hybrids can be biomass S concentrations also need to be as low as recommended for high yields (yielding up to 25 t ha Ϫ1 ), but M. sinensis possible. (nonhybrid) genotypes have higher combustion qualities. In mid-and To date, most research on Miscanthus sp. as an energy south Europe, M. ϫ giganteus (yielding up to 38 t ha Ϫ1 ) or specific crop has concentrated on maximizing the yield of a high-yielding M. sinensis hybrids (yielding up to 41 t ha Ϫ1 ) are more genotypes selected, there were four acquisitions of M. ϫ gigan-

This paper describes the complete findings of the EU-funded research project OPTIMISC, which investigated methods to optimize the production and use of miscanthus biomass. Miscanthus bioenergy and bioproduct chains were investigated by trialing 15 diverse germplasm types in a range of climatic and soil environments across central Europe, Ukraine, Russia, and China. The abiotic stress tolerances of a wider panel of 100 germplasm types to drought, salinity, and low temperatures were measured in the laboratory and a field trial in Belgium. A small selection of germplasm types was evaluated for performance in grasslands on marginal sites in Germany and the UK. The growth traits underlying biomass yield and quality were measured to improve regional estimates of feedstock availability. Several potential high-value bioproducts were identified. The combined results provide recommendations to policymakers, growers and industry. The major technical advances in miscanthus production achieved by OPTIMISC include: (1) demonstration that novel hybrids can out-yield the standard commercially grown genotype Miscanthus x giganteus; (2) characterization of the interactions of physiological growth responses with environmental variation within and between sites; (3) quantification of biomass-quality-relevant traits; (4) abiotic stress tolerances of miscanthus genotypes; (5) selections suitable for production on marginal land; (6) field establishment methods for seeds using plugs; (7) evaluation of harvesting methods; and (8) quantification of energy used in densification (pellet) technologies with a range of hybrids with differences in stem wall properties. End-user needs were addressed by demonstrating the potential of optimizing miscanthus biomass composition for the production of ethanol and biogas as well as for combustion. The costs and life-cycle assessment of seven miscanthus-based value chains, including small- and large-scale heat and power, ethanol, biogas, and insulation material production, revealed GHG-emission- and fossil-energy-saving potentials of up to 30.6 t CO2eq C ha−1y−1 and 429 GJ ha−1y−1, respectively. Transport distance was identified as an important cost factor. Negative carbon mitigation costs of –78€ t−1 CO2eq C were recorded for local biomass use. The OPTIMISC results demonstrate the potential of miscanthus as a crop for marginal sites and provide information and technologies for the commercial implementation of miscanthus-based value chains.

Field trials in Europe with Miscanthus over the past 25 years have demonstrated that interspecies hybrids such as M. 9 giganteus (M 9 g) combine both high yield potentials and low inputs in a wide range of soils and climates. Miscanthus hybrids are expected to play a major role in the provision of perennial lignocellulosic biomass across much of Europe as part of a lower carbon economy. However, even with favourable policies in some European countries, uptake has been slow. M 9 g, as a sterile clone, can only be propagated vegetatively, which leads to high establishment costs and low multiplication rates. Consequently, a decade ago, a strategic decision to develop rapidly multiplied seeded hybrids was taken. To make progress on this goal, we have (1) harnessed Correspondence: John Clifton-

Genetic improvement through breeding is one of the key approaches to increasing biomass supply. This paper documents the breeding progress to date for four perennial biomass crops (PBCs) that have high output–input energy ratios: namely Panicum virgatum (switchgrass), species of the genera Miscanthus (miscanthus), Salix (willow) and Populus (poplar). For each crop, we report on the size of germplasm collections, the efforts to date to phenotype and genotype, the diversity available for breeding and on the scale of breeding work as indicated by number of attempted crosses. We also report on the development of faster and more precise breeding using molecular breeding techniques. Poplar is the model tree for genetic studies and is furthest ahead in terms of biological knowledge and genetic resources. Linkage maps, transgenesis and genome editing methods are now being used in commercially focused poplar breeding. These are in development in switchgrass, miscanthus and willow generating large genetic and phenotypic data sets requiring concomitant efforts in informatics to create summaries that can be accessed and used by practical breeders. Cultivars of switchgrass and miscanthus can be seed‐based synthetic populations, semihybrids or clones. Willow and poplar cultivars are commercially deployed as clones. At local and regional level, the most advanced cultivars in each crop are at technology readiness levels which could be scaled to planting rates of thousands of hectares per year in about 5 years with existing commercial developers. Investment in further development of better cultivars is subject to current market failure and the long breeding cycles. We conclude that sustained public investment in breeding plays a key role in delivering future mass‐scale deployment of PBCs.

Growth in planted areas of Miscanthus for biomass in Europe has stagnated since 2010 due to technical challenges, economic barriers and environmental concerns. These limitations need to be overcome before biomass production from Miscanthus can expand to several million hectares. In this paper, we consider the economic and environmental effects of introducing seed based hybrids as an alternative to clonal M. x giganteus (Mxg). The impact of seed based propagation and novel agronomy was compared with current Mxg cultivation and used in 10 commercially relevant, field scale experiments planted between 2012 and 2014 in the United Kingdom, Germany, and Ukraine. Economic and greenhouse gas (GHG) emissions costs were quantified for the following production chain: propagation, establishment, harvest, transportation, storage, and fuel preparation (excluding soil carbon changes). The production and utilization efficiency of seed and rhizome propagation were compared. Results show that new hybrid seed propagation significantly reduces establishment cost to below £900 ha-1. Calculated GHG emission costs for the seeds established via plugs, though relatively small, was higher than rhizomes because fossil fuels were assumed to heat glasshouses for raising seedling plugs (5.3 and 1.5 kg CO2 eq. C Mg [dry matter (DM)]-1), respectively. Plastic mulch film reduced establishment time, improving crop economics. The breakeven yield was calculated to be 6 Mg DM ha-1 y-1, which is about half average United Kingdom yield for Mxg; with newer seeded hybrids reaching 16 Mg DM ha-1 in second year United Kingdom trials. These combined improvements will significantly increase crop profitability. The trade-offs between costs of production for the preparation of different feedstock formats show that bales are the best option for direct firing with the lowest transport costs (£0.04 Mg-1 km-1) and easy on-farm storage. However, if pelleted fuel is required then chip harvesting is more economic. We show how current seed based propagation methods can increase the rate at which Miscanthus can be scaled up; ∼×100 those of current rhizome propagation. These rapid ramp rates for biomass production are required to deliver a scalable and economic Miscanthus biomass fuel whose GHG emissions are ∼1/20th those of natural gas per unit of heat.

Miscanthus is a genus of perennial rhizomatous grasses with C4 photosynthesis which is indigenous in a wide geographic range of Asian climates. The sterile clone, Miscanthus × giganteus (M. × giganteus), is a naturally occurring interspecific hybrid that has been used commercially in Europe for biomass production for over a decade. Although, M. × giganteus has many outstanding performance characteristics including high yields and low nutrient offtakes, commercial expansion is limited by cloning rates, slow establishment to a mature yield, frost, and drought resistance. In this paper, we evaluate the performance of 13 novel germplasm types alongside M. × giganteus and horticultural “Goliath” in trials in six sites (in Germany, Russia, The Netherlands, Turkey, UK, and Ukraine). Mean annual yields across all the sites and genotypes increased from 2.3 ± 0.2 t dry matter ha−1 following the first year of growth, to 7.3 ± 0.3, 9.5 ± 0.3, and 10.5 ± 0.2 t dry matter ha−1 following the second, third, and fourth years, respectively. The highest average annual yields across locations and four growth seasons were observed for M. × giganteus (9.9 ± 0.7 t dry matter ha−1) and interspecies hybrid OPM-6 (9.4 ± 0.6 t dry matter ha−1). The best of the new hybrid genotypes yielded similarly to M. × giganteus at most of the locations. Significant effects of the year of growth, location, species, genotype, and interplay between these factors have been observed demonstrating strong genotype × environment interactions. The highest yields were recorded in Ukraine. Time needed for the crop establishment varied depending on climate: in colder climates such as Russia the crop has not achieved its peak yield by the fourth year, whereas in the hot climate of Turkey and under irrigation the yields were already high in the first growing season. We have identified several alternatives to M. × giganteus which have provided stable yields across wide climatic ranges, mostly interspecies hybrids, and also Miscanthus genotypes providing high biomass yields at specific geographic locations. Seed-propagated interspecific and intraspecific hybrids, with high stable yields and cheaper reliable scalable establishment remain a key strategic objective for breeders.

No abstract