Developing efficient and stable non‐noble electrocatalysts for the oxygen evolution reaction (OER) remains challenging for practical applications. While nickel–iron layered double hydroxides (NiFe‐LDH) are emerging as prominent candidates with promising OER activity, their catalytic performance is still restricted by the limited active sites, poor conductivity and durability. Herein, hierarchical nickel–iron–cobalt LDH nanosheets/carbon fibers (NiFeCo‐LDH/CF) are synthesized through solvent‐thermal treatment of ZIF‐67/CF. Extended X‐ray adsorption fine structure analyses reveal that the Co substitution can stabilize the Fe local coordination environment and facilitate the π‐symmetry bonding orbital in NiFeCo‐LDH/CF, thus modifying the electronic structures. Coupling with the structural advantages, including the largely exposed active surface sites and facilitated charge transfer pathway ensured by CF, the resultant NiFeCo‐LDH/CF exhibits excellent OER activity with an overpotential of 249 mV at 10 mA cm−1 as well as robust stability over 20 h.

No abstract

Ni-rich LiNi0.8Co0.1Mn0.1O2 oxide has been modified by ultrathin Al2O3 coatings via atomic layer deposition (ALD) at a growth rate of 1.12 Å/cycle. All characterizations results including TEM, SEM, XRD and XPS together confirm high conformality and uniformity of the resultant Al2O3 layer on the surface of LiNi0.8Co0.1Mn0.1O2 particles. Coating thickness of the Al2O3 layer is optimized at ~2 nm, corresponding to 20 ALD cycles to enhance the electrochemical performance of Ni-rich cathode materials at extended voltage ranges. As a result, 20 Al2O3 ALD-coated LiNi0.8Co0.1Mn0.1O2 cathode material can deliver an initial discharge capacity of 212.8 mAh/g, and an associated coulombic efficiency of 84.0% at 0.1 C in a broad voltage range of 2.7–4.6 V vs. Li+/Li in the first cycle, which were both higher than 198.2 mAh/g and 76.1% of the pristine LiNi0.8Co0.1Mn0.1O2 without the Al2O3 protection. Comparative differential capacity (dQ/dV) profiles and electrochemical impedance spectra (EIS) recorded in the first and 100th cycles indicated significant Al2O3 ALD coating effects on suppressing phase transitions and electrochemical polarity of the Ni-rich LiNi0.8Co0.1Mn0.1O2 core during reversible lithiation/delithiation. This work offers oxide-based surface modifications with precise thickness control at an atomic level for enhanced electrochemical performance of Ni-rich cathode materials at extended voltage ranges.

A novel high-voltage cathode material Na6Fe5(SO4)8 (NFS) is successfully prepared for sodium-ion batteries for the first time. It is found that the NFS cathode shows a high working voltage of 3.7 V, together with an attractive energy density approaching 450 W h kg−1. And, based on an NFS@5%CNTs cathode and hard carbon (HC) anode, a full NFS@5%CNTs//HC cell can deliver an impressive energy density approaching 350 W h kg−1 and excellent cycling stability over 1000 cycles at 2C.

No abstract

In situ XRD examinations demonstrate significant effects of a Li2MnO3 coating on suppressing structural degradation during charging/discharging of Ni-rich cathode materials for enhanced cycling stability.

No abstract

No abstract