fields is breaking out, such as the Internet of Things (IoTs), big data, humanoid robotics, and artificial intelligence (AI). Nowadays, the rapid advancement of these functional electronic devices is transforming the way people communicate with each other and with their surroundings, which has integrated our world into an intelligent information network. Owing to that no electronics works without electricity, the processes of human informatization and intelligence depend on broad energy supplies and powerful power supports. In other words, electric power can be regarded as the flowing blood that keeps every components of the current society running normally and healthily. However, with the rapid consumption of conventional fossil fuels as well as the growing voice of environmental protection, the current energy structure and its supply status are facing unprecedented challenges. On the one hand, the overwhelming energy crisis and ecological deterioration have become huge bottlenecks restricting socioeconomic development.[1] Some serious situations may even worsen to the root of interstate interest conflicts or the disaster that threatens the survival of mankind. In this case, the transform of energy structure from scarce, pollution-prone, and irreproducible mineral resources to abundant, environmentally friendly, and renewable green energies is desperately required. On the other hand, the traditional centralized, immobile, and ordered energy supply patterns based on power plants are incompatible with the present development of functional electronics associated with individual person, which follows a general trend of miniaturization, portability, and low power. As the information age is coming, billions of things must be connected with sensors for various measurements, perceptions, controls, and data transmissions. [2] These mobile, human-oriented, randomly and massively distributed sensing networks also require the corresponding matched power supply system. Therefore, it turns out that the unreasonable energy structures as well as the mismatched supply pattern lead to the current development dilemma.Portable power supplies and self-powered systems are the most promising solutions for the above straits. For wearable power sources, one of the compromises is to choose small-size Integration of advanced nanogenerator technology with conventional textile processes fosters the emergence of textile-based nanogenerators (NGs), which will inevitably promote the rapid development and widespread applications of next-generation wearable electronics and multifaceted artificial intelligence systems. NGs endow smart textiles with mechanical energy harvesting and multifunctional self-powered sensing capabilities, while textiles provide a versatile flexible design carrier and extensive wearable application platform for their development. However, due to the lack of an effective interactive platform and communication channel between researchers specializing in NGs and those good at textiles, it is rather difficult to achieve fiber...

Herein, an antibacterial system combining the "safe" carbon nanomaterials, graphene quantum dots (GQDs), with a low level of H2O2 has been put forward. It has been found that the peroxidase-like activity of GQDs originates from their ability to catalyze the decomposition of H2O2, generating ·OH. Since the ·OH has a higher antibacterial activity, the conversion of H2O2 into ·OH improves the antibacterial performance of H2O2, which makes it possible to avoid the toxicity of H2O2 at high levels in wound disinfection. All the experiments in vitro display that this intrinsic activity exerts a high enhancement of antibacterial activity of H2O2, and the designed system possessed broad spectrum of antibacterial activity against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria. More importantly, to assess the antibacterial efficacy of the designed system in actual wound disinfection, the GQD-Band-Aids are prepared and show excellent antibacterial property with the assistance of H2O2 at low dose in vivo.

Metal-organic frameworks (MOFs) have been used for photodynamic therapy (PDT) of cancers by integrating photosensitizers, which cause cytotoxic effects on cancer cells by converting tumor oxygen into reactive singlet oxygen (O). However, the PDT efficiency of MOFs is severely limited by tumor hypoxia. Herein, by decorating platinum nanozymes on photosensitizer integrated MOFs, we report a simple yet versatile strategy for enhanced PDT. The platinum nanoparticles homogeneously immobilized on MOFs possess high stability and catalase-like activity. Thus, our nanoplatform can facilitate the formation of O in hypoxic tumor site via HO-activated evolvement of O, which can cause more serious damage to cancer cells. Our finding highlights that the composites of nanozymes and MOFs have the potential to serve as efficient agents for cancer therapy, which will open an avenue of nanozymes and MOFs toward biological applications.

Mimicking the comprehensive functions of human sensing via electronic skins (e-skins) is highly interesting for the development of human-machine interactions and artificial intelligences. Some e-skins with high sensitivity and stability were developed; however, little attention is paid to their comfortability, environmental friendliness, and antibacterial activity. Here, we report a breathable, biodegradable, and antibacterial e-skin based on all-nanofiber triboelectric nanogenerators, which is fabricated by sandwiching silver nanowire (Ag NW) between polylactic-co-glycolic acid (PLGA) and polyvinyl alcohol (PVA). With micro-to-nano hierarchical porous structure, the e-skin has high specific surface area for contact electrification and numerous capillary channels for thermal-moisture transfer. Through adjusting the concentration of Ag NW and the selection of PVA and PLGA, the antibacterial and biodegradable capability of e-skins can be tuned, respectively. Our e-skin can achieve real-time and self-powered monitoring of whole-body physiological signal and joint movement. This work provides a previously unexplored strategy for multifunctional e-skins with excellent practicability.

Rapid advancements in stretchable and multifunctional wearable electronics impose a challenge on corresponding power devices that they should have comparable portability and stretchability. Here, we report a highly stretchable and washable all-yarn-based self-charging knitting power textile that enables both biomechanical energy harvesting and simultaneously energy storing by hybridizing triboelectrical nanogenerator (TENG) and supercapacitor (SC) into one fabric. With the weft-knitting technique, the power textile is qualified with high elasticity, flexibility, and stretchability, which can adapt to complex mechanical deformations. The knitting TENG fabric is able to generate electric energy with a maximum instantaneous peak power density of ∼85 mW·m and light up at least 124 light-emitting diodes. The all-solid-state symmetrical yarn SC exhibits lightweight, good capacitance, high flexibility, and excellent mechanical and long-term stability, which is suitable for wearable energy storage devices. The assembled knitting power textile is capable of sustainably driving wearable electronics (for example, a calculator or temperature-humidity meter) with energy converted from human motions. Our work provides more opportunities for stretchable multifunctional power sources and potential applications in wearable electronics.

The insufficient intracellular H2O2 level in tumor cells is closely associated with the limited efficacy of chemodynamic therapy (CDT). Despite tremendous efforts, engineering CDT agents with a straightforward and secure H2O2 supplying ability remains a great challenge. Inspired by the balance of H2O2 generation and elimination in cancer cells, herein, a nanozyme-based H2O2 homeostasis disruptor is fabricated to elevate the intracellular H2O2 level through facilitating H2O2 production and restraining H2O2 elimination for enhanced CDT. In the formulation, the disruptor with superoxide dismutase-mimicking activity can convert O2 •– to H2O2, promoting the production of H2O2. Simultaneously, the suppression of catalase activity and depletion of glutathione by the disruptor weaken the transformation of H2O2 to H2O. Thus, the well-defined system could perturb the H2O2 balance and give rise to the accumulation of H2O2 in cancer cells. The raised H2O2 level would ultimately amplify the Fenton-like reaction-based CDT efficiency. Our work not only paves a way to engineer alternative CDT agents with a H2O2 supplying ability for intensive CDT but also provides new insights into the construction of bioinspired materials.

Graphitic carbon nitride (g-C3 N4 ) has been used as photosensitizer to generate reactive oxygen species (ROS) for photodynamic therapy (PDT). However, its therapeutic efficiency was far from satisfactory. One of the major obstacles was the overexpression of glutathione (GSH) in cancer cells, which could diminish the amount of generated ROS before their arrival at the target site. Herein, we report that the integration of Cu(2+) and g-C3 N4 nanosheets (Cu(2+) -g-C3 N4 ) led to enhanced light-triggered ROS generation as well as the depletion of intracellular GSH levels. Consequently, the ROS generated under light irradiation could be consumed less by reduced GSH, and efficiency was improved. Importantly, redox-active species Cu(+) -g-C3 N4 could catalyze the reduction of molecular oxygen to the superoxide anion or hydrogen peroxide to the hydroxyl radical, both of which facilitated the generation of ROS. This synergy of improved ROS generation and GSH depletion could enhance the efficiency of PDT for cancer therapy.

The development of wearable and large-area energy-harvesting textiles has received intensive attention due to their promising applications in next-generation wearable functional electronics. However, the limited power outputs of conventional textiles have largely hindered their development. Here, in combination with the stainless steel/polyester fiber blended yarn, the polydimethylsiloxane-coated energy-harvesting yarn, and nonconductive binding yarn, a high-power-output textile triboelectric nanogenerator (TENG) with 3D orthogonal woven structure is developed for effective biomechanical energy harvesting and active motion signal tracking. Based on the advanced 3D structural design, the maximum peak power density of 3D textile can reach 263.36 mW m under the tapping frequency of 3 Hz, which is several times more than that of conventional 2D textile TENGs. Besides, its collected power is capable of lighting up a warning indicator, sustainably charging a commercial capacitor, and powering a smart watch. The 3D textile TENG can also be used as a self-powered active motion sensor to constantly monitor the movement signals of human body. Furthermore, a smart dancing blanket is designed to simultaneously convert biomechanical energy and perceive body movement. This work provides a new direction for multifunctional self-powered textiles with potential applications in wearable electronics, home security, and personalized healthcare.