In this study, a multiple sensor data fusion system is anticipated as essential for monitoring of cutting operations, by identifying suitable sensor locations to obtain feedback signals periodically. The sensor signal derives the failure during machining owing to complex cutting tool geometry even in machining of composites. Nano metal matrix composites (NMMC) being extremely upright in mechanical characteristics, consequently machining of these hybrid nano metal matrix composites reinforced with difficult-to-cut nano particles leads to reduced tool life thereby causing rapid flank wear. Therefore, it is a challenge to identify the wear features caused during machining of tailor made NMMC's, reducing wastage and preventing machine malfunction. This paper presents a comprehensive review on the machining strategies in extreme output conditions which rely on input parameters of speed, feed and depth of cut influencing tool life during CNC machining. This can be achieved only with multiple sensor data fusion technique during CNC machining.

No abstract

No abstract

In this paper, a connection between vibration amplitude and tool wear when drilling of IS3048 steel utilizing different dimensioned tools is dissected through tests. Discriminant features, which are sensitive to drill wear and breakage, were developed. These were discovered to be somewhat impervious toward sensor location and cutting conditions. In the process, the vibration amplitude features a checking highlight dependent on ascertaining both the tools and their performance over vibrations, which was discovered to be somewhat powerful for on-line identification of drill tool breakage in both frequency and time domains. These vibrational amplitude signal features are directly affected, related to the tool geometry, which give higher chances of tool selection criteria during the drilling process. The experiments were carried out using solid carbide tool with change in tool geometry under dry conditions where the vibration amplitude for both is evaluated. The results revealed that cutting tool vibrational amplitude and tool wear were relatively dependent showing the tool selection of suitable tool geometry.

No abstract