In the current scenario, many natural fibers available in the world can be used in various applications in the day-to-day life of biomedical products, automobile parts, industrial products, etc. Biocomposites can replace or serve as a framework allowing the regeneration of traumatized, degenerated tissues, and organs, thus, improving the patients’ quality of life. This research work is aimed at fabricating and investigating the natural biopolymer composites for biomedical applications. There are two sets of fiber composites fabricated in this research work. Ramie fiber considers a common base fiber for both composites. Hemp fibers and coir fibers were considered as filler in this research work. Biodegradable and bioresorbable polypropylene resins are used to fabricate the biocomposite using the compression moulding technique. Different proportion specimen mechanical properties were compared for bone fixtures and joint applications. The contour plots and bar charts were plotted to identify the variations in the volume percentage. The individual fiber specimens also have significant properties when compared with the composite fibers. Then, the individual superior property-based combinations such as hemp and coir fiber mixed with biodegradable and bioresorbable polypropylene/ramie fiber were recommended to produce joints and bone fixtures to alleviate pain for patients.
This optimization investigation focused on the reinforced metal matrix composite of aluminium alloy. Novel of this work is to fabricate the AA6066 composite with HSS and Cu, continually conduct machining tests, and evaluate the tool wear, surface roughness, and thrust force of the stir-casted specimens. The aluminium composite has 90 percentage of AA6066 alloy reinforcement with six percentage of high-speed steel and four percentage of copper alloy made by the casting method. The fabricated composites’ turning parameters were optimized through the Taguchi method. The turning operation can be done with the help of the normal lathe with the CBN insert tool. The operation parameters such as feed, depth of cut, and steam pressure of the cutting fluid were considered with three different equal intervals in each parameter. In this investigation, the L9 orthogonal array method is used to identify the optimum values of the turning parameters among the considered machining parameters concerning the response such as wear on the turning tool and thrust forces created on machining. The outcome based on the parameters was identified and mentioned as the rank order for individual and combination of all responses with different conditions. Then, the separate and combined optimized input parameters were provided as the conclusion.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.