The hysteresis Fe-Cr-Co alloys based on the combination of producibility and mechanical and physical properties, are promising magnetic-hard materials. The powder metallurgy provides great technological advantages for designing parts from Fe-Cr-Co system. The higher hysteresis properties were obtained due to the required morphology of α 1 ordered magnetic phase. Ordering of structure made it possible to produce α1 phase at the stage of preliminary heat treatment and further development of thermal treatment. The Fe -22,5 %Cr -15 %Co -(4 %Mo) nanostructured powder alloys were investigated. The powders of extremely pure elements were used as their components. The use of ferrosilicon provided sintering in the presence of a liquid phase formed by contact melting, which resulting in porosity of approximately 2 %. The structure of the sintered samples had α-phase with an average grain size of 90 μm for samples without molybdenum and of 150 μm for those with molybdenum. The subsequent tempering at 520 -550°C caused ordering of the structure, which confirmed the fragmentation of the grain to 50 μm. Preliminary ordering made it possible to increase the magnetic properties twice. The required hysteresis properties were obtained after stepwise tempering in the range of 640 -580°С. After the treatments, the two-phase structure was formed. The lattice parameters of magnetic phases were determined. The powder hysteresis alloys developed, the technologies of their production and their treatment resulted in the superiority of the powder hysteresis alloys over widely used Vicalloys. These Fe-Cr-Co alloys are believed to be in the designing of hysteresis motor rotors. Порошковые сплавы на основе системы Fe-Cr-Co (ХК) по сочетанию технологичности, механических и физических свойств являются перспективными магнитотвердыми материалами. Большие технологические преимущества полу-чения деталей из материалов данной системы способны обеспечить технологии порошковой металлургии. Для реа-лизации высоких гистерезисных свойств требуются заданные количество и морфология упорядоченной магнитной фазы α 1 . В работе, морфологию фаз и структурный состав сплавов регулировали упорядочением на стадии предва-рительного термического воздействия и последующей термической обработки. Исследованы наноструктурирован-ные магнитные порошковые материалы системы Fe -22,5 %Cr -15 %Co -1 %Si -(4 %Мо). В качестве компонентов ис-пользовали порошки особо чистых элементов. Использование феррокремния обеспечивало спекание в присутствии жидкой фазы, образующейся за счет контактного плавления. В результате спекания формировалась структура пори-стостью примерно 2 %. Структура спеченных образцов -альфа-фаза со средним размером зерна у образцов без мо-либдена -90 мкм и 150 мкм с молибденом. Проведение последующего отпуска при температурах 520 -550 °С обес-печивало упорядочение структуры, что косвенно подтверждало фрагментирование зеренной структуры до 50 мкм. Предварительное упорядочение позволило повысить показатели магнитных свойств до 2 раз. Требуемые гистере-зисные свой...
Генералова К.Н., Глухов А.В., Волков А.Ю. Рентгеноструктурный анализ кинетики атомного упорядочения по типу L1 0 в нестехиометрическом медно-золотом сплаве // Вестник Пермского национального исследовательского политехнического университета. Машиностроение, материаловедение. -2018. -Т. 20, № 2. -С. 75-85. of atomic ordering by L1 0 -type in non-stoichiometric copper-gold alloy: x-ray analysis. 1 Пермский национальный исследовательский политехнический университет, Пермь, Россия 2 Институт физики металлов им. М.Н. Михеева Уральского отделения Российской академии наук, Екатеринбург, Россия РЕНТГЕНОСТРУКТУРНЫЙ АНАЛИЗ КИНЕТИКИ АТОМНОГО УПОРЯДОЧЕНИЯ ПО ТИПУ L1 0 В НЕСТЕХИОМЕТРИЧЕСКОМ МЕДНО-ЗОЛОТОМ СПЛАВЕУпорядоченный эквиатомный сплав CuAu (Cu-75 мас. % Au) нашел применение на практике как контактный материал в системах управления авиакосмической техники. Формирование в нем сверхструктуры типа L1 0 приводит к снижению удельного электросопротивления приблизительно в 2,5 раза, а образующиеся при этом с-доменные границы повышают прочностные свойства.В настоящее время технике требуются новые сплавы, с более высокими прочностными свойствами. Рассматривается нестехиометрический золото-медный сплав, имеющий более высокое содержание золота: Cu-80 мас. % Au. Физико-механические свойства этого золото-медного сплава практически не изучены, кинетика его атомного упорядочения не исследовалась, термическая стабильность формирующихся в нем упорядоченных фаз CuAuI и CuAuII неизвестна. Целью данной работы является изучение кинетики атомного упорядочения в сплаве Cu-80 мас. % Au с использованием метода рентгеноструктурного анализа.Исследованием установлено, что скорость атомного упорядочения сплава Cu-80 мас. % Au много ниже по сравнению с хорошо изученным эквиатомным сплавом CuAu. В работе описана методика оценки степени дальнего порядка, приведены конкретные примеры расчетов на основе полученных рентгенограмм. Показано, что старение закаленного сплава в течение 1 мес. при температуре 200 °С не приводит к формированию в нем хорошо упорядоченного состояния. Степень дальнего порядка после аналогичной термобработки предварительно деформированного сплава еще ниже. Сделан вывод, что предварительная деформация исследуемого сплава не приводит к ускорению фазового превращения, что не характерно для большинства упорядочивающихся систем. В работе также обнаружена высокая термическая стабильность упорядоченной орторомбической фазы CuAuII.Такая сверхструктура характеризуется большим количеством границ различного типа, что может быть использовано для упрочнения материала.Полученные результаты представляют как научный, так и практический интерес. Ключевые слова: сплав медь-золото, эквиатомный, фазовые превращения, сверхструктура, атомный дальний порядок, структурные методы исследования, анализ рентгеновских дифракций, область когерентного рассеяния, тетрагональность, деформированное состояние.The ordered equiatomic CuAu (Cu-75 wt. % Au) alloy has been used in practice as a contact material in aerospace control systems. The formation of a superstructu...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.