The authors present the prototype of a chemical sensor using a capacitive micromachined ultrasonic transducer array. Each element in the array consists of a large number of resonating membranes connected in parallel. A five-channel oscillator circuit operates at the resonant frequency around 6 MHz in this prototype. The surface of the elements in the array is coated by polymers such as polyallylamine hydrochloride, polyethylene glycol, and polyvinyl alcohol to detect different chemicals. By measuring shift in oscillation frequencies due to the mass-loading effect, analytes, e.g., water and isopropanol, with concentrations around 20 ppbv ͑parts per 10 9 by volume͒ range can be detected.

The effects of B on the microstructural and mechanical characteristics of resistance seam welded high strength low alloy linepipe steel were investigated at different regions, such as weld, heat affected zone (HAZ) and base. Because most of the solute B atoms were already precipitated as iron borocarbides and iron borides in as welded steels, the improved hardenability was not observed regardless of the observed regions. The amount of dissolved B precipitates increased with austenitising temperature, and the pre-existing B precipitates were fully dissolved at 950uC for 180 s. The segregation of solute B atoms into austenite grain boundaries was more marked at higher austenitising temperatures, and the segregated solute B atoms greatly increased the hardenability of the austenitised pipes, resulting in hard microstructures like bainite and martensite. The B addition also effectively compensated for the deteriorated hardness at the weld and HAZ of the tempered specimens, although B atoms were precipitated during tempering.

No abstract