Palm oil mill effluent (POME) is wastewater generated from the palm oil milling process. It is regarded as a highly polluting wastewater as it has a high chemical oxygen demand (COD), and contains high levels of oil and suspended solids. Pretreatment of POME is desirable before a subsequent biological or other treatment. This paper reports a study of POME pretreatment by (1) electrocoagulation and (2) conventional coagulation with Al 2 (SO 4 ) 3 . At an optimal condition with a current density of 20 A/m 2 for 5 min at 313 K and pH 5, the percentage of oil, COD, suspended solids, and total solids removal by electrocoagulation were 72%, 64%, 53%, and 43%, respectively. The electrical consumption under this condition was in the order of 0.10 kWh/m 3 . The addition of NaNO3 improved the electrocoagulation, and it may also be beneficial for a subsequent biological treatment. At high current densities and/or long electrocoagulation time, POME treatment produced bubbles, which decrease the efficiency of oil removal. This effect did not occur in conventional coagulation. However, chemical coagulation limits oil removal from POME due to the effect of pH. Overall, electrocoagulation should cause less environmental damage than conventional chemical coagulation by Al 2 (SO 4 ) 3 as it treats POME without the need to add sulphate ions.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.