A highly efficient silicon (Si) hybrid external cavity laser with a wavelength tunable ring reflector is fabricated on a complementary metal-oxide semiconductor (CMOS)-compatible Si-on-insulator (SOI) platform and experimental results with high output power are demonstrated. A III-V semiconductor gain chip is edge-coupled into a SOI cavity chip through a SiN(x) spot size converter and Si grating couplers are incorporated to enable wafer-scale characterization. The laser output power reaches 20 mW and the highest wall-plug efficiency of 7.8% is measured at 17.3 mW in un-cooled condition. The laser wavelength tuning ranges are 8 nm for the single ring reflector cavity and 35 nm for the vernier ring reflector cavity, respectively. The Si hybrid laser is a promising light source for energy-efficient Si CMOS photonic links.

No abstract

Peripheral coupled waveguide (PCW) electroabsorption modulator (EAM) with different dimensions is studied. By incorporating a waveguide taper in the PCW to reduce the absorption at the input facet of the EAM, we show that the saturation effect due to high current density can be reduced.

Silicon photonic (SiP) sensors offer a promising platform for robust and low-cost decentralized diagnostics due to their high scalability, low limit of detection, and ability to integrate multiple sensors for multiplexed analyte detection. Their CMOS-compatible fabrication enables chip-scale miniaturization, high scalability, and low-cost mass production. Sensitive, specific detection with silicon photonic sensors is afforded through biofunctionalization of the sensor surface; consequently, this functionalization chemistry is inextricably linked to sensor performance. In this review, we first highlight the biofunctionalization needs for SiP biosensors, including sensitivity, specificity, cost, shelf-stability, and replicability and establish a set of performance criteria. We then benchmark biofunctionalization strategies for SiP biosensors against these criteria, organizing the review around three key aspects: bioreceptor selection, immobilization strategies, and patterning techniques. First, we evaluate bioreceptors, including antibodies, aptamers, nucleic acid probes, molecularly imprinted polymers, peptides, glycans, and lectins. We then compare adsorption, bioaffinity, and covalent chemistries for immobilizing bioreceptors on SiP surfaces. Finally, we compare biopatterning techniques for spatially controlling and multiplexing the biofunctionalization of SiP sensors, including microcontact printing, pin- and pipette-based spotting, microfluidic patterning in channels, inkjet printing, and microfluidic probes.