Abstract. We compare field hyperspectral bidirectional reflectance distribution function (BRDF) measurements acquired by a hyperspectral goniometer system known as the goniometer of the Rochester Institute of Technology (GRIT) during an experiment in the Algodones Dunes system in March 2015 with NASA Goddard's light detection and ranging, hyperspectral, and thermal imagery of the site acquired during the experiment. We augment our field spectral data collection with laboratory hyperspectral BRDF measurements of samples brought back from the Algodones Dunes site using GRIT and our second-generation goniometer GRIT-two (GRIT-T).In these laboratory experiments, we vary geophysical parameters such as sediment density and grain size distribution of the sediments that would typically impact observed BRDF with the goal of extending the range of applicability of our resulting BRDF spectral libraries. Geotechnical measurements on site confirm the variability of geophysical parameters such as density and grain size distributions within the dune system, and measurements with GRIT and GRIT-T demonstrate the impact on observed spectral variation. By augmenting field spectral libraries with laboratory BRDF, we show that a greater proportion of the dune system is more faithfully represented in the expanded spectral library. Beyond developing appropriate calibration data for airborne and satellite imagery of the Algodones Dunes, laboratory and field studies also support goals to develop reliable retrieval methods for geophysical quantities such as sediment density directly from spectral imagery. We consider approaches based on the Hapke model. Our approaches use the invariance of the observed functional forms of the single scattering phase function, which must be invariant to differences in the illumination geometry. Fill factor is retrieved and correlates with expected direct measurements of sediment density in a laboratory setting. © The Authors.Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.

No abstract

, "Fully automated laboratory and field-portable goniometer used for performing accurate and precise multiangular reflectance measurements," J. Appl. Remote Sens. 11(4), 046014 (2017), doi: 10.1117/1.JRS.11.046014. Abstract. Field-portable goniometers are created for a wide variety of applications. Many of these applications require specific types of instruments and measurement schemes and must operate in challenging environments. Therefore, designs are based on the requirements that are specific to the application. We present a field-portable goniometer that was designed for measuring the hemispherical-conical reflectance factor (HCRF) of various soils and low-growing vegetation in austere coastal and desert environments and biconical reflectance factors in laboratory settings. Unlike some goniometers, this system features a requirement for "target-plane tracking" to ensure that measurements can be collected on sloped surfaces, without compromising angular accuracy. The system also features a second upward-looking spectrometer to measure the spatially dependent incoming illumination, an integrated software package to provide full automation, an automated leveling system to ensure a standard frame of reference, a design that minimizes the obscuration due to self-shading to measure the opposition effect, and the ability to record a digital elevation model of the target region. This fully automated and highly mobile system obtains accurate and precise measurements of HCRF in a wide variety of terrain and in less time than most other systems while not sacrificing consistency or repeatability in laboratory environments.

Various field portable goniometers have been designed to capture in-situ measurements of a materials bidirectional reflectance distribution function (BRDF), each with a specific scientific purpose in mind. 1-4 The Rochester Institute of Technology's (RIT) Chester F. Carlson Center for Imaging Science recently created a novel instrument incorporating a wide variety of features into one compact apparatus in order to obtain very high accuracy BRDFs of short vegetation and sediments, even in undesirable conditions and austere environments. This next generation system integrates a dual-view design using two VNIR/SWIR spectroradiometers to capture target reflected radiance, as well as incoming radiance, to provide for better optical accuracy when measuring in non-ideal atmospheric conditions or when background illumination effects are non-negligible. The new, fully automated device also features a laser range finder to construct a surface roughness model of the target being measured, which enables the user to include inclination information into BRDF post-processing and further allows for roughness effects to be better studied for radiative transfer modeling. The highly portable design features automatic leveling, a precision engineered frame, and a variable measurement plane that allow for BRDF measurements on rugged, un-even terrain while still maintaining true angular measurements with respect to the target, all without sacrificing measurement speed. Despite the expanded capabilities and dual sensor suite, the system weighs less than 75 kg, which allows for excellent mobility and data collection on soft, silty clay or fine sand.

No abstract