By using additive manufacturing techniques like the laser powder bed fusion (LPBF) process, parts can be manufactured with high material efficiency because unfused powder material can be reconditioned and reused in consecutive manufacturing jobs. Nevertheless, process by-products like spatters may influence the powder quality and hence alter the mechanical properties/performance of parts. In order to investigate these dependencies, a methodology and a standard build job for the recycling behavior of the lightweight aluminum alloy AlSi10Mg was developed and built with ageing powder in 10 consecutive jobs with no refreshing between the cycles. The powder properties and mechanical performance of parts at static load for two build directions (horizontally and vertically to substrate plate) was evaluated. The influence of build height effects on mechanical performance was investigated as well. The findings may indicate that the coarsening of the powder material during recycling could lead to improved mechanical properties for the AlSi10Mg alloy.
Laser Powder Bed Fusion (LPBF) of Ti-6Al-4V enables the manufacturing of complex parts for lightweight applications. The emerging microstructure in the LPBF process and thus the mechanical properties are defined by the thermal cycles, which are locally variable for complex geometries. Predictions of local mechanical properties by simulation would reduce the development time of new applications drastically but are today not possible on part scale, so new part applications must be qualified experimentally at great effort. In this study, representative geometry sections were transferred into a simplified sample shape to mechanically characterize different geometry-dependent microstructures. In areas exposed to comparatively increased heat input over time, a lamellar α + β microstructure with β fraction up to 20% was measured in contrast to the common martensitic α′ microstructure of LPBF-manufactured Ti-6Al-4V, resulting in reduced tensile strength and fatigue life. For the first time, a correlation was successfully established between ultimate tensile strength of multiple geometries and the corresponding temperature–time cycles. With reduced computational effort by use of simplifying assumptions in the simulation, this correlation model can theoretically be applied to the part level. This work has laid the foundation for the simulation-based prediction of mechanical properties for entire parts manufactured with LPBF.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.