Here we propose a concept of conductive dry adhesives (CDA) combining a gecko-inspired hierarchical structure and an elastomeric carbon nanocomposite. To complement the poor electrical percolation of 1D carbon nanotube (CNT) networks in an elastomeric matrix at a low filler content (∼1 wt %), a higher dimensional carbon material (i.e., carbon black, nanographite, and graphene nanopowder) is added into the mixture as an aid filler. The co-doped graphene and CNT in the composite show the lowest volume resistance (∼100 ohm·cm) at an optimized filler ratio (1:9, total filler content: 1 wt %) through a synergetic effect in electrical percolation. With an optimized conductive elastomer, gecko-inspired high-aspect-ratio (>3) microstructures over a large area (∼4 in.(2)) are successfully replicated from intaglio-patterned molds without collapse. The resultant CDA pad shows a high normal adhesion force (∼1.3 N/cm(2)) even on rough human skin and an excellent cycling property for repeatable use over 30 times without degradation of adhesion force, which cannot be achieved by commercial wet adhesives. The body-attachable CDA can be used as a metal-free, all-in-one component for measuring biosignals under daily activity conditions (i.e., underwater, movements) because of its superior conformality and water-repellent characteristic.
The realization of levels of stretchability that extend beyond intrinsic limits of bulk materials is of great importance to stretchable electronics. Here we report large-area, three-dimensional nano-architectures that achieve this outcome in materials that offer both insulating and conductive properties. For the elastomer poly(dimethylsiloxane), such geometries enhance the stretchability and fracture strain by ~ 62 % and ~ 225 % over the bulk, unstructured case. The underlying physics involves local rotations of narrow structural elements in the threedimensional network, as identifi ed by mechanical modelling. To demonstrate the applications of three-dimensional poly(dimethylsiloxane), we create a stretchable conductor obtained by fi lling the interstitial regions with liquid metal. This stretchable composite shows extremely high electrical conductivity ( ~ 24,100 S cm − 1 ) even at strains > 200 % , with good cyclic properties and with current-carrying capacities that are suffi cient for interconnects in light-emitting diode systems. Collectively, these concepts provide new design opportunities for stretchable electronics.
The demand for wearable strain gauges that can detect dynamic human motions is growing in the area of healthcare technology. However, the realization of efficient sensing materials for effective detection of human motions in daily life is technically challenging due to the absence of the optimally designed electrode. Here, we propose a novel concept for overcoming the intrinsic limits of conventional strain sensors based on planar electrodes by developing highly periodic and three-dimensional (3D) bicontinuous nanoporous electrodes. We create a 3D bicontinuous nanoporous electrode by constructing conductive percolation networks along the surface of porous 3D nanostructured poly(dimethylsiloxane) with single-walled carbon nanotubes. The 3D structural platform allows fabrication of a strain sensor with robust properties such as a gauge factor of up to 134 at a tensile strain of 40%, a widened detection range of up to 160%, and a cyclic property of over 1000 cycles. Collectively, this study provides new design opportunities for a highly efficient sensing system that finely captures human motions, including phonations and joint movements.
Two-dimensional (2D) transitional metal oxides (TMOs) are an attractive class of materials due to the combined advantages of high active surface area, enhanced electrochemical properties, and stability. Among the 2D TMOs, 2D tungsten oxide (WO) nanosheets possess great potential in electrochemical applications, particularly in electrochromic (EC) devices. However, feasible production of 2D WO nanosheets is challenging due to the innate 3D crystallographic structure of WO. Here we report a novel solution-phase synthesis of 2D WO nanosheets through simple oxidation from 2D tungsten disulfide (WS) nanosheets exfoliated from bulk WS powder. The complete conversion from WS into WO was confirmed through crystallographic and elemental analyses, followed by validation of the 2D WO nanosheets applied in the EC device. The EC device showed color modulation of 62.57% at 700 nm wavelength, which is 3.43 times higher than the value of the conventional device using bulk WO powder, while also showing enhancement of ∼46.62% and ∼62.71% in switching response-time (coloration and bleaching). The mechanism of enhancement was rationalized through comparative analysis based on the thickness of the WO components. In the future, 2D WO nanosheets could also be used for other promising applications such as sensors, catalysis, thermoelectric, and energy conversion.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.