No abstract

No abstract

Determining the seismic fracture energy during an earthquake and understanding the associated creation and development of a fault zone requires a combination of both seismological and geological field data. The actual thickness of the zone that slips during the rupture of a large earthquake is not known and is a key seismological parameter in understanding energy dissipation, rupture processes and seismic efficiency. The 1999 magnitude-7.7 earthquake in Chi-Chi, Taiwan, produced large slip (8 to 10 metres) at or near the surface, which is accessible to borehole drilling and provides a rare opportunity to sample a fault that had large slip in a recent earthquake. Here we present the retrieved cores from the Taiwan Chelungpu-fault Drilling Project and identify the main slip zone associated with the Chi-Chi earthquake. The surface fracture energy estimated from grain sizes in the gouge zone of the fault sample was directly compared to the seismic fracture energy determined from near-field seismic data. From the comparison, the contribution of gouge surface energy to the earthquake breakdown work is quantified to be 6 per cent.

The Taiwan Chelungpu‐fault Drilling Project (TCDP) was undertaken in 2002 to investigate the faulting mechanism of the 1999 Taiwan Chi‐Chi earthquake. Hole B penetrated the Chelungpu fault, and recovered core samples from between 948.42 m and 1352.60 m depth. Three zones, marked 1136mFZ, 1194mFZ and 1243mFZ, were recognized in the core samples as active fault‐zones within the Chelungpu fault. Multi‐Sensor Core Logger measurements revealed lower densities and higher magnetic susceptibilities within the black gouge zones in all three fault zones. Even though the fault zone that slipped during the 1999 earthquake has not been identified, higher magnetic susceptibilities indicate that frictional heating has taken place in the Chelungpu fault.

The Taiwan Chelungpu‐fault Drilling Project (TCDP) drilled a 2‐km‐deep research borehole to investigate the structure and mechanics of the Chelungpu Fault that ruptured in the 1999 Mw 7.6 Chi‐Chi earthquake. Geophysical logs of the TCDP were carried out over depths of 500–1900 m, including Dipole Sonic Imager (DSI) logs and Formation Micro Imager (FMI) logs in order to identify bedding planes, fractures and shear zones. From the continuous core obtained from the borehole, a shear zone at a depth of 1110 meters is interpreted to be the Chelungpu fault, located within the Chinshui Shale, which extends from 1013 to 1300 meters depth. Stress‐induced borehole breakouts were observed over nearly the entire length of the wellbore. These data show an overall stress direction (∼N115°E) that is essentially parallel to the regional stress field and parallel to the convergence direction of the Philippine Sea plate with respect to the Eurasian plate. Variability in the average stress direction is seen at various depths. In particular there is a major stress orientation anomaly in the vicinity of the Chelungpu fault. Abrupt stress rotations at depths of 1000 m and 1310 m are close to the Chinshui Shale's upper and lower boundaries, suggesting the possibility that bedding plane slip occurred during the Chi‐Chi earthquake.