In this study, we show that robust and tunable acoustic asymmetric transmission can be achieved through gradient-index metasurfaces by harnessing judiciously tailored losses. We theoretically prove that the asymmetric wave behavior stems from loss-induced suppression of high order diffraction. We further experimentally demonstrate this novel phenomenon. Our findings could provide new routes to broaden applications for lossy acoustic metamaterials and metasurfaces.

Recent advances in gradient metasurfaces have shown that by locally controlling the bianisotropic response of the cells one can ensure full control of refraction, that is, arbitrarily redirect the waves without scattering into unwanted directions. In this work, we propose and experimentally verify the use of an acoustic cell architecture that provides enough degrees of freedom to fully control the bianisotropic response and minimizes the losses. The versatility of the approach is shown through the design of three refractive metasurfaces capable of redirecting a normally incident plane wave to 60°, 70°, and 80° on transmission. The efficiency of the bianisotropic designs is over 90%, much higher than the corresponding generalized Snell’s law based designs (81%, 58%, and 35%). The proposed strategy opens a new way of designing practical and highly efficient bianisotropic metasurfaces for different functionalities, enabling nearly ideal control over the energy flow through thin metasurfaces.

Metasurfaces open up unprecedented potential for wave engineering using subwavelength sheets. However, a severe limitation of current acoustic metasurfaces is their poor reconfigurability to achieve distinct functions on demand. Here a programmable acoustic metasurface that contains an array of tunable subwavelength unit cells to break the limitation and realize versatile two-dimensional wave manipulation functions is reported. Each unit cell of the metasurface is composed of a straight channel and five shunted Helmholtz resonators, whose effective mass can be tuned by a robust fluidic system. The phase and amplitude of acoustic waves transmitting through each unit cell can be modulated dynamically and continuously. Based on such mechanism, the metasurface is able to achieve versatile wave manipulation functions, by engineering the phase and amplitude of transmission waves in the subwavelength scale. Through acoustic field scanning experiments, multiple wave manipulation functions, including steering acoustic waves, engineering acoustic beams, and switching on/off acoustic energy flow by using one design of metasurface are visually demonstrated. This work extends the metasurface research and holds great potential for a wide range of applications including acoustic imaging, communication, levitation, and tweezers.

Acoustic holographic rendering in complete analogy with optical holography are useful for various applications, ranging from multi-focal lensing, multiplexed sensing and synthesizing three-dimensional complex sound fields. Conventional approaches rely on a large number of active transducers and phase shifting circuits. In this paper we show that by using passive metamaterials as subwavelength pixels, holographic rendering can be achieved without cumbersome circuitry and with only a single transducer, thus significantly reducing system complexity. Such metamaterial-based holograms can serve as versatile platforms for various advanced acoustic wave manipulation and signal modulation, leading to new possibilities in acoustic sensing, energy deposition and medical diagnostic imaging.

The valley degree of freedom in crystals offers great potential for manipulating classical waves, however, few studies have investigated valley states with complex wavenumbers, valley states in graded systems, or dispersion tuning for valley states. Here, we present tunable valley phononic crystals (PCs) composed of hybrid channel-cavity cells with three tunable parameters. Our PCs support valley states and Dirac cones with complex wavenumbers. They can be configured to form chirped valley PCs in which edge modes are slowed to zero group velocity states, where the energy at different frequencies accumulates at different designated locations. They enable multiple functionalities, including tuning of dispersion relations for valley states, robust routing of surface acoustic waves, and spatial modulation of group velocities. This work may spark future investigations of topological states with complex wavenumbers in other classical systems, further study of topological states in graded materials, and the development of acoustic devices.

A coumarin-based thiol probe featuring the 1,4-addition reaction of thiols to nitroolefin was reported. The molecular probe exhibited higher selectivity toward biothiols (Cys, Hcy and GSH) than other amino acids.

An impedance matched surface is able, in principle, to totally absorb the incident sound and yield no reflection, and this is desired in many acoustic applications. Here we demonstrate a design of impedance matched sound absorbing surface with a simple construction. By coupling different resonators and generating a hybrid resonance mode, we designed and fabricated a metasurface that is impedance-matched to airborne sound at tunable frequencies with subwavelength scale unit cells. With careful design of the coupled resonators, over 99% energy absorption at central frequency of 511 Hz with a 50% absorption bandwidth of 140 Hz is achieved experimentally. The proposed design can be easily fabricated, and is mechanically stable. The proposed metasurface can be used in many sound absorption applications such as loudspeaker design and architectural acoustics.

We present a design of acoustic metasurfaces yielding asymmetric transmission within a certain frequency band. The design consists of a layer of gradient-index metasurface and a layer of low refractive index metasurface. Incident waves are controlled in a wave vector dependent manner to create strong asymmetric transmission. Numerical simulations show that the approach provides high transmission contrast between the two incident directions within the designed frequency band. This is further verified by experiments. Compared to previous designs, the proposed approach yields a compact and planar device. Our design may find applications in various scenarios such as noise control and therapeutic ultrasound. Published by AIP Publishing.