Metal halide perovskite materials are emerging solution-processed semiconductors with considerable promise in optoelectronic devices 1,2 . Metal halide perovskite-based light-emitting devices (pLEDs) have received extensive interest for applications in flat-panel displays and solid-state lighting owing to their promise of low cost, tunable colors with narrow emission bandwidths, high photoluminescence quantum yield (PLQY), and facile solution processing [3][4][5][6][7] .However, the highest reported external quantum efficiency (EQE) of green-and red-emitting pLEDs are 14.36% 6,8 and 11.7% 7 , still far behind the performance of organic LEDs (OLEDs) [9][10][11] and inorganic quantum dot LEDs (QLEDs) 12 . Here we report visible perovskite LEDs that

Perovskite light-emitting diodes (PeLEDs) have shown excellent performance in the green and near-infrared spectral regions, with high color purity, efficiency, and brightness. In order to shift the emission wavelength to the blue, compositional engineering (anion mixing) and quantum-confinement engineering (reduced-dimensionality) have been employed. Unfortunately, LED emission profiles shift with increasing driving voltages due to either phase separation or the coexistence of multiple crystal domains. Here we report color-stable sky-blue PeLEDs achieved by enhancing the phase monodispersity of quasi-2D perovskite thin films. We selected cation combinations that modulate the crystallization and layer thickness distribution of the domains. The perovskite films show a record photoluminescence quantum yield of 88% at 477 nm. The corresponding PeLEDs exhibit stable sky-blue emission under high operation voltages. A maximum luminance of 2480 cd m−2 at 490 nm is achieved, fully one order of magnitude higher than the previous record for quasi-2D blue PeLEDs.

Semiconductor micro/nano‐cavities with high quality factor (Q) and small modal volume provide critical platforms for exploring strong light‐matter interactions and quantum optics, enabling further development of coherent and quantum photonic devices. Constrained by exciton binding energy and thermal fluctuation, only a handful of wide‐band semiconductors such as ZnO and GaN have stable excitons at room temperature. Metal halide perovskite with cubic lattice and well‐controlled exciton may provide solutions. In this work, high‐quality single‐crystalline cesium lead halide CsPbX3 (X = Cl, Br, I) whispering‐gallery‐mode (WGM) microcavities are synthesized by vapor‐phase van der Waals epitaxy method. The as‐grown perovskites show strong emission and stable exciton at room temperature over the whole visible spectra range. By varying the halide composition, multi‐color (400–700 nm).WGM excitonic lasing is achieved at room temperature with low threshold (~ 2.0 μJ cm−2) and high spectra coherence (~0.14–0.15 nm). The results advocate the promise of inorganic perovskites towards development of optoelectronic devices and strong light‐matter coupling in quantum optics.

No abstract

Semiconductor nanowires have received considerable attention in the past decade driven by both unprecedented physics derived from the quantum size effect and strong isotropy and advanced applications as potential building blocks for nanoscale electronics and optoelectronic devices. Recently, organic-inorganic hybrid perovskites have been shown to exhibit high optical absorption coefficient, optimal direct band gap, and long electron/hole diffusion lengths, leading to high-performance photovoltaic devices. Herein, we present the vapor phase synthesis free-standing CH3NH3PbI3, CH3NH3PbBr3, and CH3NH3PbIxCl3(-x) perovskite nanowires with high crystallinity. These rectangular cross-sectional perovskite nanowires have good optical properties and long electron hole diffusion length, which ensure adequate gain and efficient optical feedback. Indeed, we have demonstrated optical-pumped room-temperature CH3NH3PbI3 nanowire lasers with near-infrared wavelength of 777 nm, low threshold of 11 μJ/cm(2), and a quality factor as high as 405. Our research advocates the promise of optoelectronic devices based on organic-inorganic perovskite nanowires.

Organometal halide perovskite has recently emerged as a very promising family of materials with augmented performance in electronic and optoelectronic applications including photovoltaic devices, photodetectors, and light-emitting diodes. Herein, we propose and demonstrate facile solution synthesis of a series of colloidal organometal halide perovskite CH3NH3PbX3 (X = halides) nanoparticles with amorphous structure, which exhibit high quantum yield and tunable emission from ultraviolet to near-infrared. The growth mechanism and photoluminescence properties of the perovskite amorphous nanoparticles were studied in detail. A high-efficiency green-light-emitting diode based on amorphous CH3NH3PbBr3 nanoparticles was demonstrated. The perovskite amorphous nanoparticle-based light-emitting diode shows a maximum luminous efficiency of 11.49 cd/A, a power efficiency of 7.84 lm/W, and an external quantum efficiency of 3.8%, which is 3.5 times higher than that of the best colloidal perovskite quantum-dot-based light-emitting diodes previously reported. Our findings indicate the great potential of colloidal perovskite amorphous nanoparticles in light-emitting devices.

Graphitic carbon nitride (g-C3N4), a metal-free semiconductor with a band gap of 2.7 eV, has received considerable attention owing to its fascinating photocatalytic performances under visible-light. g-C3N4 exhibits high thermal and chemical stability and non-toxicity such that it has been considered as the most promising photocatalyst for environmental improvement and energy conservation. Hence, it is of great importance to obtain high-quality g-C3N4 and gain a clear understanding of its optical properties. Herein, we report a high-yield synthesis of g-C3N4 products via heating of high vacuum-sealed melamine powder in an ampoule at temperatures between 450 and 650 °C. Using transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), electron energy loss spectroscopy (EELS), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), the chemical composition and crystallization of the as-produced g-C3N4 are demonstrated. A systematic optical study of g-C3N4 is carried out with several approaches. The optical phonon behavior of g-C3N4 is revealed by infrared and Raman spectroscopy, and the emission properties of g-C3N4 are investigated using photoluminescence (PL) spectroscopy, while the photocatalytic properties are explored by the photodegradation experiment.

The different synthesis approaches and growth mechanisms of metal halide perovskites will be discussed along with their novel characteristics and applications.