During the oil production and processing stages, the asphaltene precipitation is one of the great operation problems of oil industry. It can precipitate in the formation, tubing, or surface, causing operating problems, such as reduction in oil recovery by changing the reservoir permeability and wettability, clogging of the pipelines, and difficulty in separations process. The quantification of asphaltenes in petroleum by ASTM D6560 standard method is very laborious and use of a larger solvent volume than necessary. The present work proposes the use of time domain nuclear magnetic resonance (TD‐NMR) as new methodology to quantify the asphaltene precipitated in crude oil. Three (light, medium, and heavy) crude oils with asphaltenes content of 0.97, 1.88, and 7.00 wt% were mixed with n‐heptane in different R (ml of solvent/g of oil) values and analyzed by means of transverse relaxation time (T2). According NMR results, the R values enough for complete asphaltene precipitation for the oils A, B, and C were, respectively, equal to 16.50, 23.00, and 39.50 ml g−1. These outcomes represent a reduction of 58.75%, 42.50%, and 1.25% in the solvent volume per mass of oil for the oil A, B, and C, respectively, compared to the ASTM D6560 method, which imposes 40 ml g−1. Therefore, it has been shown that TD‐NMR can be applied to estimate the amount of asphaltene precipitated in petroleum and have potential to be applied in routine analysis with advantages of saving time and costs.
