Abstract-Advances in reflectarrays and array lenses with electronic beam-forming capabilities are enabling a host of new possibilities for these high-performance, low-cost antenna architectures. This paper reviews enabling technologies and topologies of reconfigurable reflectarray and array lens designs, and surveys a range of experimental implementations and achievements that have been made in this area in recent years. The paper describes the fundamental design approaches employed in realizing reconfigurable designs, and explores advanced capabilities of these nascent architectures, such as multi-band operation, polarization manipulation, frequency agility, and amplification. Finally, the paper concludes by discussing future challenges and possibilities for these antennas.

The concept and analysis of a terahertz (THz) frequency-reconfigurable antenna using graphene are presented. The antenna exploits dipole-like plasmonic resonances that can be frequency-tuned on large range via the electric field effect in a graphene stack. In addition to efficient dynamic control, the proposed approach allows high miniaturization and good direct matching with continuous wave THz sources. A qualitative model is used to explain the excellent impedance stability under reconfiguration. These initial results are very promising for future all-graphene THz transceivers and sensors.

Periodic structures with subwavelength features are instrumental in the versatile and effective control of electromagnetic waves from radio frequencies up to optics. In this paper, we theoretically evaluate the potential applications and performance of electromagnetic metasurfaces made of periodically patterned graphene. Several graphene metasurfaces are presented, thereby demonstrating that such ultrathin surfaces can be used to dynamically control the electromagnetic wave reflection, absorption, or polarization. Indeed, owing to the graphene properties, the structure performance in terms of resonance frequencies and bandwidths changes with the variation of electrostatic bias fields. To demonstrate the applicability of the concept at different frequency ranges, the examples provided range from microwave to infrared, corresponding to graphene features with length-scales of a few millimeters down to about a micrometer, respectively. The results are obtained using a full-vector semianalytical numerical technique developed to accurately model the graphene-based multilayer periodic structures under study.PACS numbers: 33.57.+c and 81.05.Xj

The analytical basis for the resonances and anti-resonances of loop antennas and meta-material ring resonators J. Appl. Phys. 112, 094911 (2012) A metamaterial antenna with frequency-scanning omnidirectional radiation patterns Appl. Phys. Lett. 101, 173501 (2012) A leaky-wave groove antenna at optical frequency J. Appl. Phys. 112, 074320 (2012) An alternative method for the measurement of the microwave temperature coefficient of resonant frequency (τf) J. Appl. Phys. 112, 074106 (2012) Additional information on J. Appl. Phys.

The concept, analysis, and design of series switches for graphene-strip plasmonic waveguides at near infrared frequencies are presented. Switching is achieved by using graphene's field effect to selectively enable or forbid propagation on a section of the graphene strip waveguide, thereby allowing good transmission or high isolation, respectively. The electromagnetic modeling of the proposed structure is performed using full-wave simulations and a transmission line model combined with a matrix-transfer approach, which takes into account the characteristics of the plasmons supported by the different graphene-strip waveguide sections of the device. The performance of the switch is evaluated versus different parameters of the structure, including surrounding dielectric media, electrostatic gating and waveguide dimensions.