RESUMO:Objetivou-se, nesta pesquisa, avaliar a qualidade dos painéis laminados unidirecionais (LVL) produzidos com lâminas de Schizolobium amazonicum (paricá), Eucalyptus saligna e Pinus taeda. Foram produzidos em laboratório painéis LVL com sete lâminas de 2,0 mm de espessura com diferentes composições utilizando resina fenol-formaldeído. As lâminas de paricá foram pré-classificadas em diferentes classes de módulo de elasticidade dinâmico (MOEd) através do uso de "stress wave machine". As lâminas de Eucalyptus saligna e Pinus taeda foram utilizadas nas capas dos painéis com objetivo de reforçar a resistência estrutural dos painéis LVL. Foram avaliadas as propriedades de resistência da linha de cola aos esforços de cisalhamento (RLC) e flexão estática (MOE e MOR, edge e flat). A classificação de lâminas de paricá com base nas classes de MOEd não influenciou de forma significativa nos resultados de resistência da linha de cola, MOE e MOR edge. Para o MOE e MOR flat, a utilização de lâminas com MOEd classe 1, contribuiu de forma significativa para o aumento nos valores médios destas propriedades. Da mesma forma, a utilização de lâminas de Eucalyptus saligna nas faces do painel contribuiu para o aumento nos valores médios de MOE e MOR, edge e flat.Palavras-chave: Lâminas de madeira, paricá, compensados. PRODUCTION OF LAMINATED VENEER LUMBER LVL USING VENEER OF INTRODUÇÃOPreocupados com a imagem negativa da devastação da floresta amazônica e pressões ambientalistas sobre uso industrial de madeiras tropicais sem manejo florestal sustentado, os empresários do setor florestal e madeireiro da Amazônia passaram a investir em implantação de florestas plantadas com espécies nativas da região. Uma dessas espécies é o Schizolobium amazonicum, conhecido como paricá, que demonstrou ser uma excelente alternativa do ponto de vista silvicultural, além de produzir madeira com características tecnológicas favoráveis à produção de lâminas e painéis de madeira (SOCIEDADE BRASILEIRA DE SILVICULTURA -SBS, 2007).Os plantios em escala comercial de paricá -Schizolobium amazonicum Huber ex. Ducke, estão concentrados no estado do Pará, especialmente na região de Paragominas. De acordo com os dados da SBS (2007), estima-se que a área de plantio seja superior a 50 mil ha. A sua madeira apresenta coloração branca e tem densidade
RESUMOEsta pesquisa teve por objetivo avaliar o potencial de utilização de madeira de Schizolobium amazonicum (Paricá) e Cecropia hololeuca (Embaúba) para produção de painéis aglomerados. Foram produzidos painéis experimentais com densidade nominal de 0,70 g/cm³, utilizando a resina uréia-formaldeído e partículas de madeira de Paricá e Embaúba, e mistura destas, em proporções de 75, 50 e 25%. A madeira de Pinus taeda foi utilizada como testemunha. Os painéis foram prensados com pressão específica de 40 kgf/cm², temperatura de 160ºC e tempo de prensagem de 8 minutos. Os resultados das avaliações de propriedades de absorção de água, inchamento em espessura, ligação interna, módulo de elasticidade e módulo de ruptura, indicaram que as madeiras de Schizolobium amazonicum (Paricá) e Cecropia hololeuca (Embaúba) são tecnicamente viáveis para produção de painéis aglomerados. Evaluation of potential use of the wood of Schizolobium amazonicum "Paricá" and Cecropia hololeuca "Embaúba" to particleboard manufacture ABSTRACT This research was developed to evaluate the potential use of the woods Schizolobium amazonicum (Paricá) and Cecropia hololeuca (Embaúba) for manufacturing particleboard. Were made panels with the densities of 0.70 g/cm³, using mixtures of urea-formaldehyde resin and wood particles of Paricá and Embaúba, in proportions of 75, 50 and 25%. The Pinus taeda wood was used as the reference. The panels were pressed at the temperature of 160ºC, pressure of 40 kgf/cm², for 8 minutes. The evaluations of the properties of water absorption, thickness swelling, internal bond, modulus of elasticity and modulus of ruptures, showed that the woods of Schizolobium amazonicum (Paricá) e Cecropia hololeuca (Embaúba) are technically feasible for particleboard manufacture.
Incêndios florestais são considerados catástrofes ambientais e podem ser provocados por ações humanas ou por fatores naturais. A região do Parque Nacional da Chapada Diamantina (Chapada Diamantina Bahia) está entre as Unidades de Conservação Federais que registram grandes números de focos de incêndios. O estudo desta região, e de uma área circundante de 10km do parque, tem como objetivo identificar possíveis relações entre processos atmosféricos e a quantidade de ocorrências de focos de fogo. Para isso, foi utilizada uma série temporal de 6 anos (2015 2020) e coletados dados disponibilizados pelo INPE e INMET, contendo registros de ocorrências de focos de fogo e dados meteorológicos respectivamente.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.