In biological fluids, proteins may associate with nanoparticles (NPs), leading to the formation of a so-called "protein corona" largely defining the biological identity of the particle. Here, we present a novel approach to assess apparent binding affinities for the adsorption/desorption of proteins to silver NPs based on the impact of the corona formation on the agglomeration kinetics of the colloid. Affinities derived from circular dichroism measurements complement these results, simultaneously elucidating structural changes in the adsorbed protein. Employing human serum albumin as a model, apparent affinities in the nanomolar regime resulted from both approaches. Collectively, our findings now allow discrimination between the formation of protein mono- and multilayers on NP surfaces.
Spherical silver nanoparticles with a diameter of 50 AE 20 nm and stabilized with either poly(N-vinylpyrrolidone) (PVP) or citrate were dispersed in different cell culture media: (i) pure RPMI, (ii) RPMI containing up to 10% of bovine serum albumin (BSA), and (iii) RPMI containing up to 10% of fetal calf serum (FCS). The agglomeration behavior of the nanoparticles was studied with dynamic light scattering and optical microscopy of individually tracked single particles. Whereas strong agglomeration was observed in pure RPMI and in the RPMI-BSA mixture within a few hours, the particles remained well dispersed in RPMI-FCS. In addition, the biological effect of PVP-stabilized silver nanoparticles and of silver ions on human mesenchymal stem cells (hMSCs) was studied in pure RPMI and also in RPMI-BSA and RPMI-FCS mixtures, respectively. Both proteins considerably increased the cell viability in the presence of silver ions and as well as silver nanoparticles, indicating a binding of silver by these proteins.
Interactions between differently functionalised silver and gold nanoparticles (NPs) as well as polystyrene nanoparticles with bovine serum albumin (BSA) are studied using circular dichroism (CD) spectroscopy. It is found that the addition of NPs to the protein solution destroys part of the helical secondary structure of the protein as a result of surface adsorption. From the loss of free protein and hence the extent of their structural change adsorption equilibrium constants are derived. The results reveal that citrate‐coated gold and silver NPs exhibit much stronger interactions with BSA than polymeric or polymer‐coated metallic NPs. It is therefore concluded that for the particles considered, the influence of surface composition on the interaction behaviour dominates that of the core.
Oxide semiconductors are highly suitable materials for solution‐processed/printed electronics (PE); the growing interest in them can be related to their excellent intrinsic properties, such as high mobility, optical transparency, thermal and environmental stability, and so on. However, high process temperatures remain as the foremost challenge that may limit the compatibility of printed oxide electronics to inexpensive flexible substrates. Here, the possibility of using photonic curing methods to lower the process temperature is investigated, even down to room temperature (RT). Two distinct ultraviolet (UV) curing techniques, involving UV–visible light pulses and continuous‐wave UV lasers are exercised and compared. Combining UV curing with oxide nanoparticulate channel layer and electrolytic gate insulators, it is demonstrated that high performance field‐effect transistors (FETs) with device mobility as high as 12 cm2 V−1 s−1 can be processed entirely at room temperature and realized on plastic substrates. The fabrication steps include printing of a heavily stabilized semiconducting nanoparticulate channel layer, followed by decomposition and removal of the semi‐insulating polymer ligands using UV‐photon energies. The curing process is found to be fast and high‐throughput manufacturing technique compatible. At the same time, the energy requirement to remove the polymer stabilizers is insignificant, thereby ensuring no temperature rise of the parent substrates.
All over the world, different types of nanomaterials with a diversified spectrum of applications are designed and developed, especially in the field of nanomedicine. The great variety of nanoparticles (NPs), in vitro test systems and cell lines led to a vast amount of publications with conflicting data. To identify the decisive principles of these variabilities, we conducted an intercomparison study of collaborating laboratories within the German DFG Priority Program SPP1313, using well-defined experimental parameters and well-characterized NPs. The participants analyzed the in vitro biocompatibility of silica and polymer NPs on human hepatoma HepG2 cells. Nanoparticle mediated effects on cell metabolism, internalization, and inflammation were measured. All laboratories showed that both nanoparticle formulations were internalized and had a low cytotoxicity profile. Interestingly, small variations in nanoparticle preparation, cell handling and the type of culture slide influenced the nanoparticle stability and the outcomes of cell assays. The round robin test demonstrated the importance of the use of clearly defined and characterized NPs and parameters for reproducible results across laboratories. Comparative analyses of in vitro screening methods performed in multiple laboratories are absolutely essential to establish robust standard operation procedure as a prerequisite for sound hazard assessment of nanomaterials.
Oxide semiconductors are highly promising candidates for the most awaited, next-generation electronics, namely, printed electronics. As a fabrication route for the solution-processed/printed oxide semiconductors, photonic curing is becoming increasingly popular, as compared to the conventional thermal curing method; the former offers numerous advantages over the latter, such as low process temperatures and short exposure time and thereby, high throughput compatibility. Here, using dissimilar photonic curing concepts (UV-visible light and UV-laser), we demonstrate facile fabrication of high performance InO field-effect transistors (FETs). Beside the processing related issues (temperature, time etc.), the other known limitation of oxide electronics is the lack of high performance p-type semiconductors, which can be bypassed using unipolar logics from high mobility n-type semiconductors alone. Interestingly, here we have found that our chosen distinct photonic curing methods can offer a large variation in threshold voltage, when they are fabricated from the same precursor ink. Consequently, both depletion and enhancement-mode devices have been achieved which can be used as the pull-up and pull-down transistors in unipolar inverters. The present device fabrication recipe demonstrates fast processing of low operation voltage, high performance FETs with large threshold voltage tunability.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.