Electrochemical sensors to quantify concentrations of emerging pollutants have attracted great attention from the industry and scientific community. Nanomaterials such as carbon black have been applied in sensors to identify substances that are toxic to the environment and human health due to their excellent electroanalytical properties. The aim of the study was to develop a novel electrochemical sensor for the endocrine disruptor hormone determination. To our knowledge, for the first time the synthesis of material based on carbon black containing immobilized palladium nanoparticles, with the application for the hormone ethinylestradiol, is reported in the literature. The material was synthesized, characterized, and applied to the determination in tap water and human urine of the synthetic hormone 17α-ethinylestradiol (EE2), which is currently considered an emerging pollutant. The morphology, structure and electrochemical performance of the sensors were characterized by scanning electron microscopy (SEM) and cyclic voltammetry (CV). Differential pulse voltammetry (DPV) in sodium phosphate buffer solution at pH 5.0 allowed the generation of a method to quantify the concentration of 17αethinylestradiol in a linear range of 0.5-119.0 μmol L À 1 , obtaining 81.0 nmol L À 1 of calculated limit of detection (LOD). The system was efficient in detecting 17αethinylestradiol in real urine samples and showed no interferences for ascorbic acid, uric acid, progesterone, and dopamine. It is noteworthy that the results obtained showed good recovery values, considering that the urine samples were not previously treated or pre-concentrated, which suggests the development of an electrochemical sensor that works in situ and in real time to monitor relevant substances in the control clinical and environmental, with the possibility of point-of-care analyses.
The metal contamination and the degradation of polyethylene terephthalate (PET) due to human activities have contributed to the worsening of environmental problems in aquatic systems. Therefore, the study aimed to evaluate PET microplastic adsorption levels when exposed to high amounts of Ni, Cu and Co. The PET microplastic was characterized by scanning electron microscopy, surface area, porosity, and Fourier transform infrared spectroscopy with attenuated total re ectance. The results showed that the surface area, the presence of macro and mesopores, and the functional groups in uence the adsorption of metals on the surface of PET microplastic. The construction and shape of the adsorption isotherms con rmed the presence of mesoporosity and macroporosity on the PET microplastic surface. The Freundlich and Langmuir models were used to study the adsorption capacity. The kinetics of adsorptions were interpreted using pseudo-rst order and pseudo-second order models. The results indicated that the Langmuir isotherm and the pseudo-second order adequately described the adsorption of metals by the PET microplastic. The removal rates by the PET microplastic varied from 8 to 34 % for Ni, 5 to 40 % for Cu and 7 to 27 % for Co after a period of 5 days. Furthermore, the adsorption was predominantly chemical and extremely fast, indicating that the presence of microplastics in the environment can lead to a rapid metal accumulation which elevates the hazards potential of microplastic in living beings.
HighlightsA novel evaluation PET microplastic contamination by Ni, Cu and Co was reported Hazardous concentration of metals adsorbed on the PET surface was found from 5 daysThe adsorption process was well described by the Langmuir model
The metal contamination and the degradation of polyethylene terephthalate (PET) due to human activities have contributed to the worsening of environmental problems in aquatic systems. Therefore, the study aimed to evaluate PET microplastic adsorption levels when exposed to high amounts of Ni, Cu and Co. The PET microplastic was characterized by scanning electron microscopy, surface area, porosity, and Fourier transform infrared spectroscopy with attenuated total reflectance. The results showed that the surface area, the presence of macro and mesopores, and the functional groups influence the adsorption of metals on the surface of PET microplastic. The construction and shape of the adsorption isotherms confirmed the presence of mesoporosity and macroporosity on the PET microplastic surface. The Freundlich and Langmuir models were used to study the adsorption capacity. The kinetics of adsorptions were interpreted using pseudo-first order and pseudo-second order models. The results indicated that the Langmuir isotherm and the pseudo-second order adequately described the adsorption of metals by the PET microplastic. The removal rates by the PET microplastic varied from 8 to 34 % for Ni, 5 to 40 % for Cu and 7 to 27 % for Co after a period of 5 days. Furthermore, the adsorption was predominantly chemical and extremely fast, indicating that the presence of microplastics in the environment can lead to a rapid metal accumulation which elevates the hazards potential of microplastic in living beings.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.