No abstract

No abstract

Among the various agro-industrial by-products, sugar beet molasses produced by sugar refineries appear as a potential feedstock for ethanol production through yeast fermentation. A response surface methodology (RSM) was developed to better understand the effect of three process parameters (concentration of nutrient, yeast and initial sugar) on the ethanol productivity using diluted sugar beet molasses and Saccharomyces cerevisiae yeast. The first set of experiments performed at lab-scale indicated that the addition of 4 g/L of nutrient combined with a minimum of 0.2 g/L of yeast as well as a sugar concentration lower than 225 g/L was required to achieve high ethanol productivities (<15 g/L/d). The optimization allowed to considerably reduce the amount of yeast initially introduced in the fermentation substrate while still maximizing both ethanol productivity and yield process responses. Finally, scale-up assays were carried out in 7.5 and 100 L bioreactors using the optimal conditions: 150 g/L of initial sugar concentration, 0.27 g/L of yeast and 4 g/L of nutrient. Within 48 h of incubation, up to 65 g/L of ethanol were produced for both scales, corresponding to an average ethanol yield and sugar utilization rate of 82% and 85%, respectively. The results obtained in this study highlight the use of sugar beet molasses as a low-cost food residue for the sustainable production of bioethanol.

The use of β-galactosidase in food products has been a major focus of the industry. Therefore, the development of effi cient and inexpensive methodologies to purify it is essential. Thus, this study aimed to recover the enzyme β-galactosidase (β-gal) by ion-exchange chromatography in a fi xed-bed column. Batch adsorption tests were performed using four types of adsorbents. The β-gal adsorption capacity in batch mode using Streamline DEAE resin presented the best performance, with a retention capacity of 18.77 ± 0.14 U/g at pH 6.0. A 2 2 experimental design was applied to optimize the β-gal recovery using an AKTA Start system, evaluating the ionic strength and the pH as process parameters. The results showed that ionic strength exerted a greater infl uence on fold purifi cation (FP). The β-gal fraction in elution using 0.1-0.4 M of NaCl showed a yield of 51.65 ± 0.17% and FP of 2.00 ± 0.43. Electrophoresis confi rmed the β-gal recovery, where an evident band with a molecular weight between 60 and 120 kDa was observed. These results point to the recovery of a stable β-gal of K. lactis with potential industrial applications.

No abstract

No abstract

The search for promising biomolecules such as chitooligosaccharides (COS) has increased due to the need for healing products that act efficiently, avoiding complications resulting from exacerbated inflammation. Therefore, this study aimed to produce COS in two stages of hydrolysis using chitosanases derived from Bacillus toyonensis. Additionally, this study aimed to structurally characterize the COS via mass spectrometry, to analyze their biocompatibility in acute toxicity models in vivo, to evaluate their healing action in a cell migration model in vitro, to analyze the anti-inflammatory activity in in vivo models of xylol-induced ear edema and zymosan-induced air pouch, and to assess the wound repair action in vivo. The structural characterization process pointed out the presence of hexamers. The in vitro and in vivo biocompatibility of COS was reaffirmed. The COS stimulated the fibroblast migration. In the in vivo inflammatory assays, COS showed an antiedematogenic response and significant reductions in leukocyte migration, cytokine release, and protein exudate. The COS healing effect in vivo was confirmed by the significant wound reduction after seven days of the experiment. These results indicated that the presence of hexamers influences the COS biological properties, which have potential uses in the pharmaceutical field due to their healing and anti-inflammatory action.

No abstract