In forest management planning and forestry decision-making there is a continuous need for higher quality information on forest resources. The aim of this study was to improve the quality of forest resource information acquired by airborne laser scanning by combining it with aerial images and current stand-register data. A k-MSN (most similar neighbor) application was constructed for the prediction of the plot and stand volumes of standing trees. The application constructed used various data sources, including laser scanner data, aerial digital photographs, class variables describing a stand, and updated old stand volumes. The ability of these data sources to predict stem volume was tested together and separately. In the airborne laser scanner data based k-MSN application, characteristics of canopy quantiles were used as independent variables. The results show that with respect to individual plot and stand volume estimation approaches, the laser-based technique is a superior one. The results were improved further when other information sources were used together with the laser scanner data. Using a combination of laser scanner data, aerial images, and class variables (on the grounds of the current forest database) improved the root mean square error (RMSE) of the estimated plot volume by 15% (from 16% to 13%) as compared to using laser scanner data on their own. When the results were averaged at the stand level, the accuracy improved considerably, but the use of other information sources together with airborne laser scanner data did not further improve the results as it did at the plot level. The RMSE of stand volume was about 6% in all data combinations where airborne laser scanning information was used. One conclusion is that making use of additional available data sources together with laser material improves the reliability of plot volume estimates. As these additional data typically mean no extra material costs (since they are available in any case), making combined use of these data and laser scanner data improves the cost efficiency of a forest inventory.

Tokola, T. 2009. Predicting tree attributes and quality characteristics of Scots pine using airborne laser scanning data. Silva Fennica 43(3): 507-521.The development of airborne laser scanning (ALS) during last ten years has provided new possibilities for accurate description of the living tree stock. The forest inventory applications of ALS data include both tree and area-based plot level approaches. The main goal of such applications has usually been to estimate accurate information on timber quantities. Prediction of timber quality has not been focused to the same extent. Thus, in this study we consider here the prediction of both basic tree attributes (tree diameter, height and volume) and characteristics describing tree quality more closely (crown height, height of the lowest dead branch and sawlog proportion of tree volume) by means of high resolution ALS data. The tree species considered is Scots pine (Pinus sylvestris), and the field data originate from 14 sample plots located in the Koli National Park in North Karelia, eastern Finland. The material comprises 133 trees, and size and quality variables of these trees were modeled using a large number of potential independent variables calculated from the ALS data. These variables included both individual tree recognition and area-based characteristics. Models for the dependent tree characteristics to be considered were then constructed using either the non-parametric k-MSN method or a parametric set of models constructed simultaneously by the Seemingly Unrelated Regression (SUR) approach. The results indicate that the k-MSN method can provide more accurate tree-level estimates than SUR models. The k-MSN estimates were in fact highly accurate in general, the RMSE being less than 10% except in the case of tree volume and height of the lowest dead branch.

Peuhkurinen, J., Maltamo, M. & Malinen, J.2008. Estimating species-specific diameter distributions and saw log recoveries of boreal forests from airborne laser scanning data and aerial photographs: a distribution-based approach. Silva Fennica 42(4): 625-641.The low-density airborne laser scanning (ALS) data based estimation methods have been shown to produce accurate estimates of mean forest characteristics and diameter distributions, according to several studies. The used estimation methods have been based on the laser canopy height distribution approach, where various laser pulse height distribution -derived predictors are related to the stand characteristics of interest. This approach requires very delicate selection methods for selecting the suitable predictor variables. In this study, we introduce a new nearest neighbor search method that requires no complicated selection algorithm for choosing the predictor variables and can be utilized in multipurpose situations. The proposed search method is based on Minkowski distances between the distributions extracted from low density ALS data and aerial photographs. Apart from the introduction of a new search method, the aims of this study were: 1) to produce accurate species-specific diameter distributions and 2) to estimate factual saw log recovery, using the estimated height-diameter distributions and a stem data bank. The results indicate that the proposed method is suitable for producing species-specific diameter distributions and volumes at the stand level. However, it is proposed, that the utilization of more extensive and locally emphasized reference data and auxiliary variables could yield more accurate saw log recoveries.

No abstract

Malinen, J. 2003. Locally adaptable non-parametric methods for estimating stand characteristics for wood procurement planning. Silva Fennica 37(1): 109-120.The purpose of this study was to examine the use of the local adaptation of the non-parametric Most Similar Neighbour (MSN) method in estimating stand characteristics for wood procurement planning purposes. Local adaptation was performed in two different ways: 1) by selecting local data from a database with the MSN method and using that data as a database in the basic k-nearest neighbour (k-nn) MSN method, 2) by selecting a combination of neighbours from the neighbourhood where the average of the predictor variables was closest to the target stand predictor variables (Locally Adaptable Neighbourhood (LAN) MSN method). The study data used comprised 209 spruce dominated stands located in central Finland and was collected with harvesters. The accuracy of the methods was analysed by estimating the tree stock characteristics and the log length/diameter distribution produced by a bucking simulation. The local k-nn MSN method was not notably better than the k-nn MSN method, although it produced less biased estimates on the edges of the input space. The LAN MSN method was found to be a more accurate method than the k-nn methods.