Running experiments with full-size gearboxes from the actual application has the advantage of giving realistic results in terms of power losses. The drawback is extensive costs, lengthy testing, and the difficulty in differentiating between load dependent and load independent losses, and which losses are coming from the gears, seals, bearings or synchronizers. In this work, the correlation between friction measurements conducted in a ball-on-disc machine and friction measurements conducted in a back-to-back gear rig is investigated. The correlation between the gear tests and the ball-on-disc tests were reasonably good in terms of absolute values, and the shape of the friction curves were similar, indicating that the ball-on-disc measurements to a large extent are capturing the behavior of the gear contact.
The behaviour of grease lubrication in a rolling bearing is less known than that of oil in the same type of tribological system. In recent years the research of grease lubrication has shown several features of the grease lubrication that differ from the classical elastohydrodynamic lubrication theory of oil lubrication, notably that starvation is more prominent under grease-lubricated conditions. The goal of the present investigation was to clarify, by using a real bearing installation and realistic running conditions, how the fundamental properties of the lubricating grease influence the lubrication in a rolling bearing. The fundamental properties of the greases considered in the study were thickener concentration, base oil viscosity, base oil bleeding rate and consistency. Results obtained with grease lubrication were verified with pure oil lubrication. The analysis of grease lubrication in the present investigation is based on the relative differences in the pulse count rate of the acoustic emission (AE) generated by the running of the bearing. In order to make the correct decisions about the lubrication situation of a bearing, the fundamentals of the behaviour of grease lubrication in rolling bearings and its influence on the AE signal have to be known. Moreover, AE has proven to be a good tool to study grease lubrication in situ in a bearing. The results show that starvation of the lubrication situation increases with increasing thickener content and decreases with lowered base oil viscosity. This is in agreement with film thickness measurements made in ball-and-disc type equipment.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.