The installations of photovoltaic (PV) solar modules are growing extremely fast. As a result of the increase, the volume of modules that reach the end of their life will grow at the same rate in the near future. It is expected that by 2050 that figure will increase to 5.5-6 million tons. Consequently, methods for recycling solar modules are being developed worldwide to reduce the environmental impact of PV waste and to recover some of the value from old modules. Current recycling methods can recover just a portion of the materials, so there is plenty of room for progress in this area. Currently, Europe is the only jurisdiction that has a strong and clear regulatory framework to support the PV recycling process. This review presents a summary of possible PV recycling processes for solar modules, including c-Si and thin-film technologies as well as an overview of the global legislation. So far, recycling processes of c-Si modules are unprofitable but are likely to be mandated in more jurisdictions. There is potential to develop new pathways for PV waste management industry development and offer employment and prospects for both public and private sector investors.

Given the rapid progress in perovskite solar cells in recent years, perovskite/silicon (Si) tandem structure has been proposed to be a potentially cost‐effective improvement on Si solar cells because of its higher efficiency at a minimal additional cost. As part of the evaluation, it is important to conduct a life cycle assessment on such technology in order to guide research efforts towards cell designs with minimum environmental impacts. Here, we carry out a life cycle assessment to assess global warming, human toxicity, freshwater eutrophication and ecotoxicity and abiotic depletion potential impacts and energy payback time associated with three perovskite/Si tandem cell structures using silver (Ag), gold (Au) and aluminium (Al) as top electrodes compared with p–n junction and hetero‐junction with intrinsic inverted layer Si solar cells. It was found that the replacement of the metal electrode with indium tin oxide/metal grid in the tandem cell reduces the environmental impacts significantly compared with the perovskite cell. For all the impacts assessed, we conclude that the perovskite/Si tandem using Al as top electrode has better environmental outcomes, including energy payback time, when compared with the other tandem structures studied. Use of Al in preference to noble metals for contacts, Si p–n junction in preference to intrinsic inverted layer and the avoidance of 2,20,7,70‐tetrakis(N,N‐di‐p‐methoxyphenylamine)9,90‐spirobifluorene (Spiro‐OMeTAD) are environmentally beneficial. The key result found of this work is that the most important factor for the better environmental impacts of these tandem solar cells is the transparency and electrical conductivity of the perovskite layer after it fails. Copyright © 2017 John Wiley & Sons, Ltd.

No abstract

Abstract:The cumulative global photovoltaic (PV) waste reached 250,000 metric tonnes by the end of 2016 and is expected to increase considerably in the future. Hence, adequate end-of-life (EoL) management for PV modules must be developed. Today, most of the EoL modules go to landfill, mainly because recycling processes for PV modules are not yet economically feasible and regulation in most countries is not yet well established. Nevertheless, several methods for recycling PV modules are under development. Life cycle assessment (LCA) is a methodology that quantifies the environmental impacts of a process or a product. An attributional LCA was undertaken to compare landfill, incineration, reuse and recycling (mechanical, thermal and chemical routes) of EoL crystalline silicon (c-Si) solar modules, based on a combination of real process data and assumptions. The results show that recovery of materials from solar modules results in lower environmental impacts compared to other EoL scenarios, considering our assumptions. The impacts could be even lower with the adoption of more complex processes that can reclaim more materials. Although recycling processes can achieve good recycling rates and recover almost all materials from solar modules, attention must be paid to the use of toxic substances during the chemical routes of recycling and to the distance to recycling centres due to the impacts of transportation.

No abstract

No abstract

No abstract

No abstract