Thrombosis and thromboembolism remain problematic for a large number of blood contacting medical devices and limit broader application of some technologies due to this surface bioincompatibility. In this study we focused on the covalent attachment of zwitterionic phosphorylcholine (PC) or sulfobetaine (SB) moieties onto a TiAl6V4 surface with a single step modification method to obtain a stable blood compatible interface. Silanated PC or SB modifiers (PCSi or SBSi) which contain an alkoxy silane group and either PC or SB groups were prepared respectively from trimethoxysilane and 2-methacryloyloxyethyl phosphorylcholine (MPC) or N-(3-sulfopropyl)-N-(methacryloxyethyl)-N,N-dimethylammonium betaine (SMDAB) monomers by a hydrosilylation reaction. A cleaned and oxidized TiAl6V4 surface was then modified with the PCSi or SBSi modifiers by a simple surface silanization reaction. The surface was assessed with x-ray photoelectron spectroscopy (XPS), attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and contact angle goniometry. Platelet deposition and bulk phase activation were evaluated following contact with anticoagulated ovine blood. XPS results verified successful modification of the PCSi or SBSi modifiers onto TiAl6V4 based on increases in surface phosphorous or sulfur respectively. Surface contact angles in water decreased with the addition of hydrophilic PC or SB moieties. Both the PCSi and SBSi modified TiAl6V4 surfaces showed decreased platelet deposition and bulk phase platelet activation compared to unmodified TiAl6V4 and control surfaces. This single step modification with PCSi or SBSi modifiers offers promise for improving the surface hemocompatibility of TiAl6V4 and is attractive for its ease of application to geometrically complex metallic blood contacting devices.

Siloxane functionalized phosphorylcholine (PC) or sulfobetaine (SB) macromolecules (PCSSi or SBSSi) were synthesized to act as surface modifying agents for degradable metallic surfaces to improve acute blood compatibility and slow initial corrosion rates. The macromolecules were synthesized using a thiol-ene radical photopolymerization technique and then utilized to modify magnesium (Mg) alloy (AZ31) surfaces via an anhydrous phase deposition of the silane functional groups. X-ray photoelectron spectroscopy surface analysis results indicated successful surface modification based on increased nitrogen and phosphorus or sulfur composition on the modified surfaces relative to unmodified AZ31. In vitro acute thrombogenicity assessment after ovine blood contact with the PCSSi and SBSSi modified surfaces showed a significant decrease in platelet deposition and bulk phase platelet activation compared with the control alloy surfaces. Potentiodynamic polarization and electrochemical impedance spectroscopy data obtained from electrochemical corrosion testing demonstrated increased corrosion resistance for PCSSi and SBSSi modified AZ31 versus unmodified surfaces. The developed coating technique using PCSSi or SBSSi showed promise in acutely reducing both the corrosion and thrombotic processes, which would be attractive for application to blood contacting devices, such as vascular stents, made from degradable Mg alloys.

Current artificial lungs and respiratory assist devices designed for carbon dioxide removal (CO2R) are limited in their efficiency due to the relatively small partial pressure difference across gas exchange membranes. To offset this underlying diffusional challenge, bioactive hollow fiber membranes (HFMs) increase the carbon dioxide diffusional gradient through the immobilized enzyme carbonic anhydrase (CA), which converts bicarbonate to CO2 directly at the HFM surface. In this study, we tested the impact of CA-immobilization on HFM CO2 removal efficiency and thromboresistance in blood. Fiber surface modification with radio frequency glow discharge (RFGD) introduced hydroxyl groups, which were activated by 1M CNBr while 1.5M TEA was added drop wise over the activation time course, then incubation with a CA solution covalently linked the enzyme to the surface. The bioactive HFMs were then potted in a model gas exchange device (0.0084 m2) and tested in a recirculation loop with a CO2 inlet of 50mmHg under steady blood flow. Using an esterase activity assay, CNBr chemistry with TEA resulted in 0.99U of enzyme activity, a 3.3 fold increase in immobilized CA activity compared to our previous method. These bioactive HFMs demonstrated 108 ml/min/m2 CO2 removal rate, marking a 36% increase compared to unmodified HFMs (p < 0.001). Thromboresistance of CA-modified HFMs was assessed in terms of adherent platelets on surfaces by using lactate dehydrogenase (LDH) assay as well as scanning electron microscopy (SEM) analysis. Results indicated HFMs with CA modification had 95% less platelet deposition compared to unmodified HFM (p < 0.01). Overall these findings revealed increased CO2 removal can be realized through bioactive HFMs, enabling a next generation of more efficient CO2 removal intravascular and paracorporeal respiratory assist devices.

Ovines are a common animal model for preclinical evaluation of cardiovascular devices including heart valves, endovascular grafts, and ventricular assist devices. Biocompatibility is essential to the success of these devices; however, tools to assess biocompatibility in ovines are limited. To address this need, antibodies that bind to activated human and bovine platelets and annexin V protein were evaluated for potential cross-reactivity to activated ovine platelets. These candidate markers were incubated with stimulated and quiescent ovine whole blood, and binding to platelets was quantified by flow cytometry. Several antihuman CD62P antibodies including one polyclonal antibody, three monoclonal antibodies, and annexin V selectively bound to activated ovine platelets. An assay to quantify platelet microaggregates was also developed. The availability of assays to quantify ovine platelet activation can increase the quality of biocompatibility data obtainable during preclinical development of artificial organs in the ovine model, potentially aiding in the evaluation of design refinements to enhance device biocompatibility. KeywordsBiocompatibility; Flow cytometry; Ovine platelets; Cardiovascular devices; Platelet activation Ovines are a common animal model for preclinical testing of blood-contacting cardiovascular devices including mechanical heart valves, endovascular grafts, and ventricular assist devices (VADs) (1-4). A critical aspect in the design of these devices is the evaluation of their blood biocompatibility. Yet, the biocompatibility data that can be obtained in ovine studies is limited due to a paucity of available assays for evaluating circulating blood elements during the implant period. In particular, there has only been one report on the use of flow cytometry to evaluate ovine platelet activation in platelet-rich plasma, and there have been no reports in the literature using such techniques to assess temporal platelet activation in ovines implanted with cardiovascular devices (5).Flow cytometry permits surface expression of platelet activation-dependent epitopes to be quantified, providing insight on circulating platelets not obtainable with platelet aggregometry and plasma assays for β-thromboglobulin and platelet factor 4 (6). Circulating activated platelets have been measured in patients with stents, mechanical heart valves, and VADs as well as in patients suffering from acute myocardial infarction and ischemic stroke [7][8][9][10][11][12][13]. The presence of circulating activated platelets has been suggested as a marker for increased risk of thrombotic complications (10). Previously, we have described several flow cytometric assays to quantify circulating activated bovine platelets and platelet microaggregates (14). These assays have been applied to assess circulating activated platelets in calves implanted with rotary VADs (14,15). The results demonstrate the ongoing presence of circulating activated platelets after the effects of surgery (without extracorporeal circulation) have di...

The PediaFlow™ pediatric ventricular assist device (VAD) is a magnetically levitated turbodynamic pump under development for circulatory support of small children with a targeted flow rate range of 0.3 - 1.5 L/min. As the design of this device is refined, ensuring high levels of blood biocompatibility is essential. In this study we characterized platelet activation during the implantation and operation of a second generation prototype of the PediaFlow VAD (PF2) and also performed a series of surgical sham studies to examine purely surgical effects on platelet activation. In addition, a newly available monoclonal antibody was characterized and shown to be capable of quantifying ovine platelet activation. The PF2 was implanted in 3 chronic ovine experiments of 16, 30, and 70 days, while surgical sham procedures were performed in 5 ovines with 30 d monitoring. Blood biocompatibility in terms of circulating activated platelets was measured by flow cytometric assays with and without exogenous agonist stimulation. Platelet activation following sham surgery returned to baseline in approximately 2 weeks. Platelets in PF2 implanted ovines returned to baseline activation levels in all three animals, and showed an ability to respond to agonist stimulation. Late term platelet activation was observed in one animal corresponding with unexpected pump stoppages related to a manufacturing defect in the percutaneous cable. The results demonstrated encouraging platelet biocompatibility for the PF2 in that basal platelet activation was achieved early in the pump implant period. Furthermore, this first characterization of the effect of a major cardiothoracic procedure on temporal ovine platelet activation provides comparative data for future cardiovascular device evaluation in the ovine model.

Individual ventricular assist device (VAD) design may affect leukocytes and impact immunity. Few studies have presented leukocyte and infection profiles in VAD patients over the course of the implant period. CD11b (MAC‐1) expression on granulocytes is an indicator of activation during inflammation, mediating extravasation and the release of reactive oxygen species in tissue. No reported studies have presented MAC‐1 expression on circulating granulocytes in VAD patients. Fifty‐six patients implanted at a single center with a HeartMate II (HMII; n = 32), HeartWare (HW; n = 12), or Thoratec pneumatic VAD (PVAD; n = 12) between 1999 and 2011 were followed for 120 days of support. The leukocyte profiles and infectious events of all patients were evaluated; additionally, a subset had MAC‐1 expression on circulating granulocytes was measured (HMII n = 9; HW n = 7; PVAD n = 4). All groups exhibited a significant peak in leukocyte numbers at postoperative day (POD) 14 while simultaneously experiencing a significant decrease in hematocrit. HMII patients exhibited a 3.2‐fold increase in granulocyte MAC‐1 expression at POD 14, and the temporal trend over the implant period differed from that experienced by HW patients. Further, HW patients experienced significantly fewer infection events. Alterations in leukocyte profiles and granulocyte activation experienced by VAD patients appear to be device‐specific. Elevations in leukocyte activation may be related to an increased risk for infection, although the specific relationship between these phenomena in this patient group is not known.

The PediaFlow pediatric ventricular assist device is a miniature magnetically levitated mixed flow pump under development for circulatory support of newborns and infants (3–15 kg) with a targeted flow range of 0.3–1.5 L/min. The first generation design of the PediaFlow (PF1) was manufactured with a weight of approximately 100 g, priming volume less than 2 mL, length of 51 mm, outer diameter of 28 mm, and with 5-mm blood ports. PF1 was evaluated in an in vitro flow loop for 6 h and implanted in ovines for three chronic experiments of 6, 17, and 10 days. In the in vitro test, normalized index of hemolysis was 0.0087 ± 0.0024 g/100L. Hemodynamic performance and blood biocompatibility of PF1 were characterized in vivo by measurements of plasma free hemoglobin, plasma fibrinogen, total plasma protein, and with novel flow cytometric assays to quantify circulating activated ovine platelets. The mean plasma free hemoglobin values for the three chronic studies were 4.6 ± 2.7, 13.3 ± 7.9, and 8.8 ± 3.3 mg/dL, respectively. Platelet activation was low for portions of several studies but consistently rose along with observed animal and pump complications. The PF1 prototype generated promising results in terms of low hemolysis and platelet activation in the absence of complications. Hemodynamic results validated the magnetic bearing design and provided the platform for design iterations to meet the objective of providing circulatory support for young children with exceptional biocompatibility.

To improve the thromboresistance of a titanium alloy (TiAl 6 V 4 ) surface which is currently utilized in several ventricular assist devices (VADs), a plasma-induced graft polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) was carried out and poly(MPC) (PMPC) chains were covalently attached onto a TiAl 6 V 4 surface by a plasma induced technique. Cleaned TiAl 6 V 4 surfaces were pretreated with H 2 O-vapor-plasma and silanated with 3-methacryloylpropyltrimethoxysilane (MPS). Next, a plasma-induced graft polymerization with MPC was performed after the surfaces were pretreated with Ar plasma. Surface compositions were verified by X-ray photoelectron spectroscopy (XPS). In vitro blood biocompatibility was evaluated by contacting the modified surfaces with ovine blood under continuous mixing. Bulk phase platelet activation was quantified by flow cytometric analysis, and surfaces were observed with scanning electron microscopy after blood contact. XPS data demonstrated successful modification of the TiAl 6 V 4 surfaces with PMPC as evidenced by increased N and P on modified surfaces. Platelet deposition was markedly reduced on the PMPC grafted surfaces and platelet activation in blood that contacted the PMPC-grafted samples was significantly reduced relative to the unmodified TiAl 6 V 4 and polystyrene control surfaces. Durability studies under continuously mixed water suggested no change in surface modification over a one month period. This modification strategy shows promise for further investigation as a means to reduce the thromboembolic risk associated with the metallic blood-contacting surfaces of VADs and other cardiovascular devices under development.