It is now widely recognized that the performance of non-structural elements is crucial to the performance of building systems during earthquakes. Field surveys and experimental studies have shown that light steel or timber framed plasterboard partition walls are particularly vulnerable. The objective of this study is to investigate the seismic performance of a novel seismic gap partition system with angled return walls under quasi-static cyclic loading applied obliquely and to investigate the benefits of using acrylic gap-filler in the seismic gaps. Two specimens were tested: a steel stud specimen and a timber stud specimen. Observed drift capacities were significantly greater than traditional plasterboard partition systems. Equations were used to predict the drift at which damage state 1 (DS1) and damage state 2 (DS2) would initiate. The equation used to estimate the drift at the onset of DS1 accurately predicted the onset of plaster cracking but overestimated the drift at which the gap filling material was damaged. The equation used to predict the onset of DS2 provided a lower bound for both specimens and also when used to predict results of previous experimental tests on seismic gap systems. The gap-filling material reduced the drift at the onset of DS1, however, it had a beneficial effect on the re-centring behaviour of the linings. Out-of-plane displacements and return wall configuration did not appear to significantly impact the onset of plaster cracking in the specimens.
This paper identifies the inherent strengths/weaknesses of rigid timber-framed partitions and quantifies the onset drifts for different damage thresholds under bi-directional seismic actions. It reports construction and quasi-static lateral cyclic testing of a multi-winged timber-framed partition wall specimen with details typical of New Zealand construction practice. Furthermore, the cyclic performance of the tested rigid timber-framed partition wall is also compared with that of similar partition walls incorporating ‘partly-sliding’ connectiondetails, and ‘seismic gaps’, previously tested under the same test setup.
Based on the experimentally recorded cyclic performance measures, theoretical equations proposed/derived in the literature to predict the ultimate strength, initial stiffness, and drift capacity of different damage states are scrutinized, and some equations are updated in order to alleviate identified possible shortcomings. These theoretical estimates are then validated with the experimental results. It is found that the equations can reasonably predict the initial stiffness and ultimate shear strength of the partitions, as well as the onset-driftscorresponding to the screw damage and diagonal buckling failure mode of the plasterboard. The predicted bi-linear curve is also found to approximate the backbone curve of the tested partition wall sensibly.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.