O PDF relativo ao artigo que solicita, não se encontra disponível em Acesso Aberto.
Motivos: O editor não permite o depósito e disponibilização em acesso aberto do PDF que solicita. Para consultar o documento deve aceder ao endereço do editor.
Zero-valent iron nanoparticles (nZVIs) are often used in environmental remediation. Their high surface area that is associated with their high reactivity makes them an excellent agent capable of transforming/degrading contaminants in soils and waters. Due to the recent development of green methods for the production of nZVIs, the use of this material became even more attractive. However, the knowledge of its capacity to de-grade distinct types of contaminants is still scarce. The present work describes the study of the application of green nZVIs to the remediation of soils contami-nated with a common antiinflammatory drug, ibuprofen. The main objectives of this work were to produce nZVIs using extracts of grape marc, black tea and vine leaves, to verify the degradation of ibuprofen in aque-ous solutions by the nZVIs, to study the remediation process of a sandy soil contaminated with ibuprofen using the nZVIs, and to compare the experiments with other common chemical oxidants. The produced nZVIs had nanometric sizes and were able to degrade ibuprofen (54 to 66% of the initial amount) in aqueous solutions. Similar remediation efficiencies were obtained in sandy soils. In this case the remediation could be enhanced (achieving degradation efficiencies above 95%) through the complemen-tation of the process with a catalyzed nZVI Fenton-like reaction. These results indicate that this remediation technology represents a good alternative to traditional and more aggressive technologies.
a b s t r a c t
Keywords:Zero-valent iron nanoparticles Green synthesis method Tree leaves Size Reactivity AgglomerationIn the last decades nanotechnology has become increasingly important because it offers indisputable advantages to almost every area of expertise, including environmental remediation. In this area the synthesis of highly reactive nanomaterials (e.g. zero-valent iron nanoparticles, nZVI) is gaining the attention of the scientific community, service providers and other stakeholders. The synthesis of nZVI by the recently developed green bottom-up method is extremely promising. However, the lack of information about the characteristics of the synthetized particles hinders a wider and more extensive application. This work aims to evaluate the characteristics of nZVI synthesized through the green method using leaves from different trees. Considering the requirements of a product for environmental remediation the following characteristics were studied: size, shape, reactivity and agglomeration tendency. The mulberry and pomegranate leaf extracts produced the smallest nZVIs (5-10 nm), the peach, pear and vine leaf extracts produced the most reactive nZVIs while the ones produced with passion fruit, medlar and cherry extracts did not settle at high nZVI concentrations (931 and 266 ppm). Considering all tests, the nZVIs obtained from medlar and vine leaf extracts are the ones that could present better performances in the environmental remediation. The information gathered in this paper will be useful to choose the most appropriate leaf extracts and operational conditions for the application of the green nZVIs in environmental remediation.
O PDF relativo ao artigo que solicita, não se encontra disponível em Acesso Aberto.
Motivos: O editor não permite o depósito e disponibilização em acesso aberto do PDF que solicita. Para consultar o documento deve aceder ao endereço do editor.
O PDF relativo ao artigo que solicita, não se encontra disponível em Acesso Aberto.
Motivos: O editor não permite o depósito e disponibilização em acesso aberto do PDF que solicita. Para consultar o documento deve aceder ao endereço do editor.
Total petroleum hydrocarbons (TPH) are important environmental contaminants which are toxic to human and environmental receptors. Several analytical methods have been used to quantify TPH levels in contaminated soils, specifically through infrared spectrometry (IR) and gas chromatogra-phy (GC). Despite being two of the most used techniques, some issues remain that have been inadequately studied: a) applicability of both techniques to soils contaminated with two distinct types of fuel (petrol and diesel), b) influence of the soil natural organic matter content on the results achieved by various analytical methods, and c) evaluation of the performance of both techniques in analyses of soils with different levels of contamination (presumably non-contaminated and po-tentially contaminated). The main objectives of this work were to answer these questions and to provide more complete information about the potentials and limitations of GC and IR techniques. The results led us to the following conclusions: a) IR analysis of soils contaminated with petrol is not suitable due to volatilisation losses, b) there is a significant influence of organic matter in IR analysis, and c) both techniques demonstrated the capacity to accurately quantify TPH in soils, irrespective of their contamination levels.
Purpose Application of zero valent iron nanoparticles is an innovative technology for ground water treatment and soil remediation. There are several methods to synthesise nano scale zero valent iron (nZVI), namely through bottom-up methods which consists on chemical reactions using strong reducing agents. In this work, the environmental impacts and costs were determined for two methods, namely the traditional one that uses sodium borohydride and the green method that uses extracts obtained from natural products. Methods The consideration of environment and economic aspects in the earlier stages of the synthesis processes and in the development of new materials is of great importance since it can help to decide if alternative methods are promising and should be further developed aiming more sustainable processes. In this work, life cycle assessment (LCA) was used as an ecodesign strategy evaluating environmental performance of the two synthesis methods, identifying critical stages of the synthesis processes of nZVI. An economic evaluation and a sensitivity analysis considering a different scenario for electricity production were also performed.
Results and discussionThe results obtained in this study showed that the green synthesis method presents lower environmental impacts than the traditional one, roughly 50% lower in the first scenario. In the second scenario, environmental impact of green synthesis corresponds to 38% of the environmental impact of traditional synthesis. In the green method, the critical stage is the extraction process which is closely related to the electricity production. In the traditional method, the reactant use is the critical stage that is related to the production of sodium borohydride. The economic evaluation indicated that the traditional synthesis method is much more expensive than the green synthesis (roughly eight times higher). Conclusions From the results obtained, it is possible to conclude that the green synthesis method presents lower environmental impacts in both scenarios and lower costs than the traditional synthesis.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.