Superabsorbent polymers (SAP) are a new, promising class of chemical admixtures which offer new possibilities in respect of influencing the properties of cement-based materials in the fresh, hardening, and hardened states. Much research work has been done in the last two decades to set the stage for introducing this truly multipurpose agent into the practice of construction. In particular, three RILEM Technical Committees: 196-ICC, 225-SAP and 260-RSC contributed considerably to the related progress by coordinating and combining the efforts of international experts in the field. The major product of the RILEM TC 225-SAP work was the State-of-the-Art Report published in 2012. This comprehensive document covered all topics relevant to the application of SAP as a concrete admixture. Since then further important progress has been made in understanding the working mechanisms of SAP in concrete and the effects of SAP-addition on various concrete properties. The article at hand presents an update on the state-of-the-art and is the concluding document delivered by the RILEM TC 260-RSC.

No abstract

Many studies have already been published concerning autogenous shrinkage in cementitious materials. Still, no consensus can be found in the literature regarding the determination of the time-zero to initiate the recording of autogenous shrinkage. With internal curing agents, a correct evaluation of their efficiency depends on an appropriate choice of the time-zero. This study investigates different approaches to estimate the time-zero for cement paste mixtures with and without superabsorbent polymers as internal curing agents. The initial and final setting times were determined by an electronic Vicat and ultrasonic pulse velocity measurements (UPV); the transition point between the fluid and solid state was determined from the autogenous strain curve; the development of the capillary pressure was also studied. The choice of time-zero before the transition point led to higher values of shrinkage strain that should not be taken into account for autogenous shrinkage. A negligible difference was found between the strains when the final setting time and the transition point were taken as time-zero. Considering the artefacts and practical issues involving the different methods, the use of the transition point from the autogenous strain curve is the most suitable technique for determining the time-zero.

High performance concrete (HPC) is a high strength concrete that undergoes a lot of early-age autogenous shrinkage (AS). If shrinkage is restrained, then micro-cracks arise and threaten the durability of the structure. Superabsorbent polymers (SAPs) can reduce/mitigate the autogenous shrinkage, due to their promising application as internal curing agents. In this paper, large-scale demonstrators were built to investigate the efficiency of SAPs to mitigate autogenous shrinkage in HPC. For this purpose, different measurement techniques were used like embedded fiber optic sensors and demountable mechanical strain gauges, complemented by AS measurements in corrugated tubes and restrained ring tests. The SAP wall showed an AS reduction of 22%, 54%, and 60% at the bottom, middle, and top, respectively, as recorded by the sensors (in comparison with the reference wall (REF)). In the corrugated tubes, mitigation of AS was shown in the SAP mixture, and under restrained conditions, in the ring test, the reference mixture cracked after two days, while the SAP mixture had not cracked at the end of the measurement period (20 days). Cracks were shown on REF wall after one day, while the SAP wall was crack-free. Water flow tests performed on the main crack of the REF wall confirmed that the flow rate is related to the third power of the crack width. All tests showed that SAPs could highly reduce AS in HPC and avoid cracking.

h i g h l i g h t s''In-house" developed SAPs can mitigate autogenous in concrete. ''In-house" developed SAPs can reduce total shrinkage in concrete. Optical fiber sensors perform better than mechanical strain gauges. Embedded optical fiber sensors can identify the crack formation in the concrete.

No abstract

Superabsorbent polymers (SAPs) have been investigated for their potential for internal curing, promotion of self-sealing, and self-healing of concrete structures. There has been a lack of publications concerning large-scale testing of structures with SAPs, and bringing this SAP-modified concretes from laboratory environment to plant-scale production might demand adaptations in the mixing protocols. In this paper, a reference mixture and a SAP-containing mixture were produced at a concrete plant scale and the influence of adding the polymers at different moments was investigated. The addition of SAPs directly in the truck, after the mixing procedure, showed no significant impact on the compressive strength of the concrete, but an agglomeration of particles was found in the air void analysis. The specimens with SAPs added directly in the truck presented an inferior performance in terms of shrinkage reduction when compared to the specimens with SAPs added on the materials belt, with the dry materials.

No abstract