A system is proposed to convert ambient mechanical vibration into electrical energy for use in powering autonomous low power electronic systems. The energy is transduced through the use of a variable capacitor. Using microelectromechanical systems (MEMS) technology, such a device has been designed for the system. A low-power controller IC has been fabricated in a 0.6-m CMOS process and has been tested and measured for losses. Based on the tests, the system is expected to produce 8 W of usable power. In addition to the fabricated programmable controller, an ultra low-power delay locked loop (DLL)-based system capable of autonomously achieving a steady-state lock to the vibration frequency is described.
A system is proposed to convert ambient mechanical vibration into electrical energy for use in powering autonomous low-power electronic systems. The energy is transduced through the use of a variable capacitor, which has been designed with MEMS (microelectromechanical systems) technology. A low-power controller IC has been fabricated in a 0.6pm CMOS process and has been tested and measured for losses. Based on the tests, the system is expected to produce SpW of usable power.
Harvesting energy from ambient vibration is a promising method for providing a continuous source of power for wireless sensor nodes. However, traditional energy harvesters are often derived from resonant linear oscillators which are capable of providing sufficient output power only if the dominant frequency of input vibrations closely matches the device resonant frequency. The limited scope of such devices has sparked an interest in the use of nonlinear oscillators as mechanisms for broadband energy harvesting. In this study, we investigate the harvesting performance of an electromagnetic harvester sustaining oscillations through the phenomena of magnetic levitation. The nonlinear behavior of the device is effectively modeled by Duffing's equation, and direct numerical integration confirms the broadband frequency response of the nonlinear harvester. The nonlinear harvester's power generation capabilities are directly compared to a linear electromagnetic harvester with similar dynamic parameters. Experimental testing shows that the presence of both high and low amplitude solutions for the nonlinear energy harvester results in a tendency for the oscillator to remain in a low energy state for non-harmonic vibration inputs, unless continuous energy impulses are provided. We conclude by considering future applications and improvements for such nonlinear devices.
A near-field, electrodynamically coupled wireless power transmission system is presented that delivers electrical power from a transmitter coil to a compact electromechanical receiver. The system integrates electromechanical energy conversion and mechanical resonance to deliver power over a range of distances using low-amplitude, low-frequency magnetic fields. Two different receiver orientations are investigated that rely on either the force or the torque induced on the receiver magnet at separation distances ranging from 2.2 to 10.2 cm. Theoretical models for each mode compare the predicted performance with the experimental results. For a 7.1 mApk sinusoidal current supplied to a transmitter coil with a 100 cm diameter, the torque mode receiver orientation has a maximum power transfer of 150 μW (efficiency of 12%) at 2.2 cm at its resonance frequency of 38.4 Hz. For the same input current to the transmitter, the force mode receiver orientation has a maximum power transfer of 37 μW (efficiency of 4.1%) at 3.1 cm at its resonance frequency of 38.9 Hz.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.