Contexto: Se realizó una búsqueda local de tejidos de fibras vegetales para determinar la composición de los grupos funcionales y morfología de su superficie antes y después de un tratamiento alcalino con miras a su empleo como refuerzo en compuestos de matriz polimérica.Método: La búsqueda se desarrolló dentro del área metropolitana del Valle de Aburrá, Colombia. Las fibras se trataron por inmersión en NaOH disuelto al 6 % w/v por 48 horas, seguida por una neutralización en ácido acético al 1 % v/v por una hora. Posteriormente fueron secadas a 60 °C por 24 horas. Las técnicas empleadas para los análisis fueron la espectroscopía infrarroja por transformada de Fourier (FTIR) y la microscopía electrónica de barrido (SEM).Resultados: Se seleccionaron tejidos de fique, yute, corteza de coco, lino y algodón. Los análisis FTIR muestran una tendencia a la disminución de ácidos grasos, hemicelulosas, ligninas y enlaces β en la superficie de las fibras, mientras que las imágenes SEM demuestran la remoción de impurezas, la exposición de rugosidades y la creación de espacios interfibrales.Conclusiones: El tratamiento alcalino podría favorecer el mecanismo de anclaje del polímero termofijo a la superficie de las fibras y la creación de enlaces entre las moléculas polares de las fibras y el polímero termofijo, disminuyendo el deslizamiento relativo entre matriz y refuerzo durante la aplicación de cargas.
En este artículo se pretende abordar la radiación infrarroja como un mecanismo principal de transferencia de calor de alta calidad en diferentes procesos de calentamiento, resaltar la pertenencia y problemática en el uso, la caracterización y el diseño de las tecnologías propias accionadas por sistemas de combustión. Para esto, se resume su fenomenología, sus definiciones, suposicionesy soluciones; se abordan algunos métodos numéricos utilizados para la solución de la ecuación de transferencia de radiación (Radiative TransferEquation (RTE)) y el acoplamiento de éstos a los códigos CFD (ComputationalFluids Dynamics); como también los tipos de equipos radiantes utilizados con mayor frecuencia, en especial los tubo radiantes; al igual que ciertas metodologíasexperimentales usadas para caracterizar los sistemas radiantes, y algunas metodologías de diseño. Se encontró, que el modelo del flux y el de transferencias discretas son pertinentes para darle solución al fenómeno con ayuda de los códigos CFD, como también, que el elemento de medición principalmente utilizado en las mediciones experimentales es el radiómetro; y que la metodología de diseño más práctica puede ser la optimización.
PurposeRemote and isolated indigenous communities in Nunavik (Canada) currently face a number of housing related challenges. This paper proposes a conceptual framework to identify the factors affecting value creation within the supply chain of social housing construction in that region. The term “social” refers to the fact that governments subsidise construction and operation of these buildings intended for low-income households.Design/methodology/approachThe research used a literature review and information collected from 3 semi-structured interviews with key stakeholders to identify the desired features of improvement or solutions (e.g. prefabrication) with respect to value creation. A SWOT analysis, an influence/dependence map and a causal loop diagram were developed to represent the supply chain.FindingsLocal job creation and the number of buildings to build were identified as the key factors that can roughly represent value creation. Energy resources, construction time, type and amount of labour force, shipping constraints, number of replacement parts and waste disposal were identified as the main factors constraining the range of solutions to implement.Practical implicationsThe framework can be used to support the decision-making in supply chain management and the design of solutions for remote areas such as Nunavik.Originality/valueThis paper is the first to analyse value creation in social building construction in remote and isolated communities such as those from Nunavik. Conceptual models achieved within the framework allowed identifying the factors that could roughly represent this value creation, as well as logical relationships that link them with other factors.
The results presented in this paper belong to the mechanical characterization of vegetal woven fabric reinforced composites with polyester resin as the matrix and fabrics made of cotton, jute and flax fibers. Test specimens were manufactured using a simple hand lay-up molding process. A group of test specimens was reinforced with the woven fabrics as delivered by the supplier, while another group was reinforced with woven fabrics that were chemically treated with Sodium hydroxide NaOH at 6% w/v for 48 hours. The fabrics were then neutralized and dried in an oven. Mechanical characterizations were performed using traction, compression, in-plane shear and interlaminar (out of plane) shear tests. Results show that the untreated flax fiber composite has the best specific properties among the three vegetal composites.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.