En esta contribución se estudió la respuesta eléctrica de la creación-aniquilación de vórtices cinemáticos en una película superconductora en presencia de una corriente continua externa a campo magnético nulo. La película se encuentra en contacto con diferentes tipos de materiales simulados a través del parámetro de extrapolación de deGennes ; a s u vez, posee una pequeña región metálica localizada a una distancia del centro. Usamos la teoría de Ginzburg-Landau dependiente del tiempo para describir la variación voltaje en función del tiempo en un proceso de creación-aniquilación de vórtices cinemáticos considerando varias posiciones del defecto metálico y del parámetro de deGennes. Nuestra investigación muestra que las corrientes críticas, amplitud y frecuencia de las oscilaciones en la curva dependen fuertemente del parámetro de deGennes y de la posición del defecto en la muestra.
T he three-Dimensional Ion Implantation technique (3DII) causes ions to collide with a solid surface in a perpendicular way regardless of the geometry of the solid (Khvesyuk & Tsygankov, 1997;Dougar-Jabon, Dulce-Moreno & Tsygankov, 2002). The steel AISI SAE 4140 has been used as substrate because of its wide use in the transport of oil industry, the specimens of steel underwent surface modification with Titanium ions (Ti) and the combined ions of titanium and nitrogen (Ti+N), with energy of 10keV for 5min and 10min. The superficially modified and unmodified specimens were characterized by Electrochemical Impedance Spectroscopy (EIS), noting among the most outstanding results the electrochemical double layer system capacitive characteristics under all tested conditions, the best corrosion performance was obtained for implanted substrates with Ti ions for 10min, having a charge transfer resistance much higher than those implanted with Ti+N and the non-implanted. Additionally it was determined that all the implanted systems can be simulated by using one equivalent circuit with a constant phase element instead of a capacitor and the non implanted substrate from day 15 can be simulated through another equivalent circuit. ABSTRACT CARACTERIZACIÓN DEL ACERO DE BAJA ALEACIÓN MODIFICADO SUPERFICIALMENTE CON IONES DE TITANIO Y NITRÓGENO CARACTERIZAÇÃO DO AÇO DE BAIXA LIGA ALTERADO SUPERFICIALMENTE COM IONES DE TITÂNIO E NITROGÊNIO 136L a técnica de implantación iónica tridimensional (3DII) consigue que los iones a implantar colisionen perpendicularmente con la superficie sin importar la geometría del sólido (Khvesyuk & Tsygankov, 1997;Dougar-Jabon et al., 2002). Se ha usado un acero de herramientas AISI SAE 4140 como sustrato por su amplio uso en la industria del transporte de hidrocarburos. Las probetas de acero se sometieron a la modificación superficial con iones Titanio (Ti) y Titanio+Nitrógeno (Ti+N) a energía de 10keV durante 5min y 10min. Los sustratos modificados y no modificados superficialmente fueron caracterizados mediante la técnica de espectroscopia de impedancia electroquímica (EIS), observando entre los resultados más resaltantes que la doble capa electroquímica del sistema en estudio presenta características capacitivas en todas las condiciones evaluadas, donde el mejor desempeño frente a la corrosión lo presentan los sustratos implantados con iones de Ti durante 10min, debido a que poseen una resistencia a la transferencia de carga mucho mayor que los implantados con iones de Ti+N y los no implantados. Adicionalmente se determinó que todos los sistemas implantados pueden ser simulados mediante el uso de un circuito equivalente, el cual posee un elemento de fase constante en lugar de un capacitor y que el sustrato sin implantar a partir del día de inmersión 15 se puede simular a través de otro circuito equivalente diferente.A técnica de implantação iônica tridimensional (3DII) consegue que os iones a serem implantados colidam perpendicularmente com a superfície sem importar a geometria do sólido (Khvesy...
En este trabajo investigamos teóricamente la configuración de vórtices y anti vórtices en una película superconductora magnéticamente nanoestructurada resolviendo numéricamente el sistema de ecuaciones diferenciales no lineales Ginzburg-Landau dependientes del tiempo. Interesantes estructuras de vórtices y antivórtices son encontradas cuando una película fina superconductora es cubierta por una red de dipolos magnéticos. Mostramos que debido a los (anti) vórtices y la supercorriente inducida por los dipolos magnéticos, la corriente crítica de la muestra incrementa si es expuesta a un campo magnético externo, caso contrario al lo que sucede en superconductores convencionales.Palabras clave: Antivórtices, Dipolos magnéticos, Nanoestructuras, Superconductor.
Se estudia una anomalía que se observa entre los modos vibracionales ópticos A1(3TO) y E(3LO)+A1(3LO) en la cerámica ferroeléctrica, Titanato de Plomo dopado con Lantano (PLT). Este material normalmente presenta una transición de fase estructural por medio de concentración, temperatura y presión hidrostática aplicada. Esta anomalía, aparece en bajas temperaturas con el aumento de la concentración de Lantano (La) y altas presiones hidrostáticas para muestras del PLT. Con el estudio de los efectos de substitución de cationes, presión y temperatura en el espectro de fonones en las muestras, a través de medidas de micro-Raman, fue posible observar un nuevo pico en el espectro Raman. Este pico, se puede estar generando por la disminución de las distancias interatómicas por efecto de las bajas temperaturas y altas presiones, siendo más evidente con la concentración de La.Palabras Clave: Anomalía, Fonones, PLT, presión, Raman.
This contribution presents a solution to the dead time problem that is known as "Smith Predictor." This solution allows us to use already known techniques for the design of controllers for systems without delay and adapt them to systems with delay. "As a design goal, it aims to achieve that the response of the system with delay, has the same dynamic characteristics of the system without delay, for example, that has the same response to the step input, but displaced in time the value of the delay.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.