A new temperature-frequency converter based on the variation of the dielectric permittivity of the Liquid Crystal (LC) material with temperature has been demonstrated. Unlike other temperature sensors based on liquid crystal processing optical signals for determining the temperature, this work presents a system that is able to sense temperature by using only electrical signals. The variation of the dielectric permittivity with temperature is used to modify the capacitance of a plain capacitor using a LC material as non-ideal dielectric. An electric oscillator with an output frequency depending on variable capacitance made of a twisted-nematic (TN) liquid crystal (LC) cell has been built. The output frequency is related to the temperature of LC cell through the equations associated to the oscillator circuit. The experimental results show excellent temperature sensitivity, with a variation of 0.40% of the initial frequency per degree Celsius in the temperature range from −6 °C to 110 °C.
In this paper we present the results that have been obtained with an automated electronic instrumentation system for monitoring ofstrain and vibrations in a composite material board with embedded opticalfibers. The objective ofthis study is to provide an electronic instrumentation referencefor the interferometric measurements using opticalfiber sensors. The mainfeatures ofour system are the simultaneous multipoint strain and vibrations measurements which allows us real time data acquisition and processing. In this work we provide results about the naturalfrequency and damping coefficient of the composite material board.
Monitoring of oxygenation in tumours is an important issue in predicting the success of anti-cancer treatments such as radiotherapy. Gradient echo (GE) imaging sequences can be used for monitoring changes in tumour blood flow and oxygenation. However, the application of this method in head and neck tumours is hampered by significant artefacts and losses of the MR signal near air-tissue interfaces. We investigated the usefulness of a gradient-echo slice excitation profile (GESEPI) sequence that should keep the oxygen contrast while recovering the signal loss caused by susceptibility artefacts. A tumour model was implanted in the neck and in the leg of mice. MR imaging was performed at 4.7 T. GE and GESEPI sequences were used for monitoring the blood oxygen level dependent (BOLD) contrast after carbogen breathing. The pO 2 was also monitored in tumours using an OxyLite probe (Oxford Optronics). Using the tumours implanted in the leg, we found that the variations of signal intensity after carbogen breathing were similar in both sequences. In the tumour implanted in the neck, it was possible, using GESEPI sequences, to recover the signal loss caused by susceptibility artefacts and to monitor the effect of carbogen-induced changes in the tumour.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.