This study examines the antimicrobial activity of silver nanoparticles incorporated into nanostructured membranes made of cellulose acetate (CA) and blends of chitosan/poly-(ethylene oxide, CTS/PEO) and prepared by electrospinning. The formation of chemically synthesized Ag nanoparticles (AgNPs) was monitored by UV-visible spectroscopy (UV-Vis) and characterized by transmission electron microscopy (TEM). The size distribution of the AgNPs was measured by dynamic light scattering (DLS), with an average size of approximately 20 nm. The presence of AgNPs on the surface of electrospun nanofibers was observed by field emission electron microscopy (FEG) and confirmed by TEM. The antimicrobial activity of AgNPs incorporated into nanostructured membranes made of CA and CTS/PEO electrospun nanofibers was evaluated in the presence of both Gram-positive bacteria, such as Staphylococcus aureus ATCC 29213 and Propionibacterium acnes ATCC 6919, and Gram-negative bacteria, such as Escherichia coli ATCC 25992 and Pseudomonas aeruginosa ATCC 17933. Microbiological results showed that the presence of AgNPs in CA and CTS/PEO nanostructured membranes has significant antimicrobial activity for the Gram-positive bacteria Escherichia coli and Propionibacterium acnes. Uniterms:Electrospinning. Silver nanoparticles/antibacterial activity. Cellulose acetate. Chitosan.Neste trabalho avaliou-se a atividade antimicrobiana das nanopartículas de prata (AgNPs) incorporadas em membranas de acetato celulose (AC) e blendas de quitosana/poli-óxido de etileno (CTS/PEO) preparadas pelo método de eletrofiação. A formação das AgNPs previamente sintetizadas foi monitorada por UV-Vis e caracterizada por microscopia eletrônica de transmissão (MET). A distribuição de tamanho das AgNPs foi mensurada por espalhamento de luz dinâmico, com tamanho médio em torno de 20 nm. A presença das NPs na superfície das nanofibras eletrofiadas foi observada por microscopia eletrônica com emissão de campo (FEG) e confirmada por MET. A atividade antimicrobiana das membranas nanoestruturadas de AC e CTS/PEO foi avaliada pelo uso de bactérias Gram-positivas, tais como Staphylococcus aureus ATCC 29213 e Propionibacterium acnes ATCC 6919, e Gram-negativas, como Escherichia coli ATCC 25992 e Pseudomonas aeruginosa ATCC 17933. Os resultados microbiológicos mostraram a presença das AgNPs nas membranas de AC e CTS/PEO com significativa atividade antimicrobiana para Escherichia coli e Propionibacterium acnes, respectivamente.Unitermos: Eletrofiação. Nanopartículas de prata/atividade antimicrobiana. Acetato de celulose. Quitosana. 912 INTRODUCTIONThe use of metal nanoparticles in various medical and biotechnological applications is one of the most investigated areas in materials science. These applications require appropriate chemical functionalization of the nanoparticles with organic molecules or their incorporation into polymer matrices (Dallas, Sharma, Zboril, 2011). Among the numerous types of nanoparticles that have been used to decorate polymers, silver nanoparticles (AgNPs) ...
IntroduçãoDevido à elevada relação entre sua área superficial e seu volume, à interconectividade de suas fibras e à existência de espaço intertistial, as nanomembranas são de grande interesse em um grande número de aplicações onde estruturas porosas são desejáveis, tais como: compósitos estruturais, exocompósitos, nanobiotecnologia, sistemas de purificação de ar, bioengenharia, engenharia ambiental e eletrônica, e indústrias energética, de defesa e segurança [1][2][3][4][5] .Embora a técnica de fabricação de fibras sintéticas utilizando descargas elétricas tenha sido descoberta no século passado [6,7] , foi apenas recentemente que o electrospinning tornou-se alvo de um grande número de pesquisadores em todo o mundo [8,9] . O princípio operacional do processo de electrospinning é relativamente simples, tornando-o bastante vantajoso quando comparado aos demais métodos de fabricação de nanofibras [2] . Além disso, o controle dimensional das nanofibras geradas, a reprodutibilidade de resultados e o grande potencial para aplicações industriais em larga escala fizeram com que o processo de electrospinning se tornasse bastante "popular" nos últimos anos.A técnica de electrospinning envolve a aplicação de um forte campo elétrico entre o polímero e um coletor metálico [3,10,11] . Geralmente, o polímero, fundido ou em solução, está contido em um reservatório com um tubo capilar (tipicamente, uma seringa hipodérmica e uma agulha), e é forçado a escoar por uma agulha por ação da gravidade ou com o auxílio de uma bomba de infusão. Quando se aplica uma alta tensão elétrica no tubo capilar, que está localizado à uma certa distância de um coletor (que pode ser plano e estacionário ou cilíndrico e rotativo), ocorre uma polarização nas moléculas do polímero. Quando a diferença de potencial elétrico entre o tubo capilar e o coletor ultrapassa um valor crítico, a força eletrostática atuando no polímero passa a ser maior do que a tensão interfacial da solução na ponta do tubo, formando o chamado cone de Taylor e acarretando a formação de um jato que é atraído em direção ao coletor. Neste ponto, o campo elétrico é responsável por alongar o jato, tornando-o cada vez mais fino, dando origem às fibras de diâmetros micro ou nanométricos [12,13] .Para que o processo de electrospinning seja possível, é necessário que o polímero esteja fundido ou disperso em solução. Dessa forma, fica evidente que as propriedades da solução (peso molecular do polímero, viscosidade, tensão interfacial e condutividade elétrica da solução, e efeito dielétrico do solvente) irão desempenhar um papel importante no processo de geração das nanofibras. Outros fatores de grande influência Caracterização Morfológica de Nanomembranas de Poliamida-66 Dopadas com Grafeno Obtidas por Electrospinning José de Ávila Júnior Programa de Pós-graduação em Engenharia Mecânica, UFMG Antônio Ferreira Ávila Departamento de Engenharia Mecânica, UFMG Matt H. Triplett Aviation and Missile Research Development and Engineering Center, AMSRD-AMR-WD-GAResumo: Neste estudo, investigou-se a ...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.