The improvement of sandy soils by incorporating new stabilizing agents in a physical and/or chemical process has become the subject of many studies in recent decades. In addition, the use of industrial wastes in this process can bring significant benefits to the environment and savings in natural resources. This work aims to evaluate the implications of incorporating porcelain polishing waste (PPW) and hydrated lime on the mechanical properties of an aeolian dune sand from the city of Natal/RN. Tests of unconfined compressive strength and split tensile strength were performed on compacted soil specimens with different contents of PPW (10%, 20% and 30%), hydrated lime (3%, 5% and 7%) and relative densities (25%, 50% and 75%). To evaluate the effects of each factor, the Response Surface Methodology with Central Composite Design was used. The results have shown that all three factors have a positive effect on the response variables. The highest strengths were obtained in regions combining high values of relative density and PPW content and an optimum lime content was found. An inversely proportional correlation and good fit to the experimental data was obtained between the strength values and the porosity/binder index (η / Biv). The strength gains were attributed to densification of the soil structure and cementation of the particles by the compounds formed in the reaction between lime and PPW. The results also showed an increase in the strength with curing time, indicating a pozzolanic activity of the mixtures.
RESUMO A geração de resíduos industriais tem aumentado continuamente motivando estudos sobre uma destinação ambientalmente correta e sustentável. Como exemplo existem os resíduos gerados em fábricas de produtos de limpeza. Com o intuito de avaliar o potencial de incorporação de lodo de uma indústria deste setor como filer para a fabricação de concretos convencionais, foram adicionados diferentes teores de lodo (5, 10, 15 e 20%) em um traço 1:2:3 (cimento:areia:brita). Foram avaliadas as propriedades mecânicas e de durabilidade destes concretos nos estados fresco e endurecido. Todos os concretos produzidos com o resíduo apresentaram aumento de trabalhabilidade atribuído à possível presença de surfactantes na composição dos efluentes. Entretanto, foram obtidas resistências à compressão inferiores ao concreto referência com evidências de um aumento na porosidade da zona de transição e maior formação do composto etringita na microestrutura. Para o máximo teor de adição, a redução na resistência foi cerca de 39%. A absorção de água e índice de vazios aumentaram levemente para todos as misturas, com exceção do concreto com 20% de lodo. A adição do resíduo na matriz cimentícia provocou uma redução na durabilidade. Como avaliação final, o teor máximo de adição recomendado é de 20%, constituindo uma proporção significativa para destinação do resíduo, entretanto, os concretos produzidos não podem ser utilizados para fins estruturais.
Modo de acesso: World Wide Web Inclui bibliografia 1. Engenharia 2. Educação.I. Título CDD-620 O conteúdo dos artigos e seus dados em sua forma, correção e confiabilidade são de responsabilidade exclusiva dos seus respectivos autores.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.