This paper reports the development of a stand-alone and portable instrument designed to measure the complex permittivity of dielectric materials at microwave frequencies. The equipment consists of an in-house singleport vectorial reflectometer and a resonant coaxial bi-reentrant microwave cavity where the material under test is placed inside a Pyrex vial, making the device appropriate for measuring liquids, semi-solids, powders and granular materials. The relation between the dielectric properties of the involved materials and the cavity resonance has been solved by numerical methods based on mode-matching and circuit analysis. In order to increase the measurement range, so that low to high loss materials can be characterized in the same cavity, the effect of the coupling network is de-embedded from the resonance measurements. The performance of the newly devised instrument is evaluated by error/uncertainty analysis and comparative studies with other wellestablished instruments and methods. Errors lower than 2% in the dielectric constant, and 5% in the loss factor, are found. This simple, portable, affordable and robust device could help non-specialized personnel to accurately measure dielectric properties of materials used in a wide range of microwave applications.

An enhanced full wave method based on circuit analysis is presented in this paper, where the whole set of modes, TE mnp and TM mnp are taken into account. The modeling of a split cylinder resonator is done with two circuit networks of one and three ports, characterized by their generalized admittance matrix (GAM), which is computed making use of mode matching method. The improved full wave circuit method has been applied to the accurate determination of dielectric properties of materials. The proposed method has been validated through comparisons with others published models and also with measurements.Index Terms-Electromagnetic modeling, full wave analysis, circuit analysis, mode matching method, split cylinder, dielectric measurements.

This paper describes the use of microwave technology to identify anti-counterfeiting markers on banknotes. The proposed method is based on a robust near-field scanning microwave microscope specially developed to measure permittivity maps of heterogeneous paper specimens at the micrometer scale. The equipment has a built-in vector network analyzer to measure the reflection response of a near-field coaxial probe, which makes it a standalone and portable device. A new approach employing the information of a displacement laser and the cavity perturbation technique was used to determine the relationship between the dielectric properties of the specimens and the resonance response of the probe, avoiding the use of distance-following techniques. The accuracy of the dielectric measurements was evaluated through a comparative study with other well-established cavity methods, revealing uncertainties lower than 5%, very similar to the accuracy reported by other more sophisticated setups. The device was employed to determine the dielectric map of a watermark on a 20 EUR banknote. In addition, the penetration capabilities of microwave energy allowed for the detection of the watermark when concealed behind dielectric or metallic layers. This work demonstrates the benefits of this microwave technique as a novel method for identifying anti-counterfeiting features, which opens new perspectives with which to develop optically opaque markers only traceable through this microwave technique.

The identification of the minerals composing rocks and their dielectric characterization is essential for the utilization of microwave energy in the rock industry. This paper describes the use of a near-field scanning microwave microscope with enhanced sensitivity for non-invasive measurements of permittivity maps of rock specimens at the micrometer scale in non-contact mode. The microwave system comprises a near-field probe, an in-house single-port vectorial reflectometer, and all circuitry and software needed to make a stand-alone, portable instrument. The relationship between the resonance parameters of the near-field probe and the dielectric properties of materials was determined by a combination of classical cavity perturbation theory and an image charge model. The accuracy of this approach was validated by a comparison study with reference materials. The device was employed to determine the permittivity maps of a couple of igneous rock specimens with low-loss and high-loss minerals. The dielectric results were correlated with the minerals comprising the samples and compared with the dielectric results reported in the literature, with excellent agreements.

An improvement of the accuracy of dielectric measurements of the open-ended coaxial resonator method is described. The technique is based on an empirical technique for de-embedding the coupling network excited by electric probes. By this procedure, the influence of the coupling structure on the resonance can be precisely eliminated independently of the coupling conditions, which guarantees a high accuracy in the permittivity determination of materials by open-ended coaxial resonators. The technique is applicable to materials with a wide range of dielectric constants and losses. The results of dielectric measurements are compared with those obtained using other standard methods.