The reverberation of a room is often controlled by installing sound absorption panels to the ceiling and on the walls. The reduced reverberation is particularly important in classrooms to maximize the speech intelligibility and in open-plan offices to make spaces more pleasant. In this study, the impact of the placement of the absorption material in a room was measured in a reverberation room and in a mockup classroom. The results show that absorption material is less efficient if it is mounted to the corners or on the edges between the walls and ceiling, if the sound field is more or less diffuse. If the room modes dominate the sound field, the most efficient location for the sound-absorbing material was found at one of the surfaces causing the modes. The results help acoustical consultants to place the absorption material in optimal locations and, generally, minimize the amount of material and save costs.

In this study, sound absorbing materials were produced through foam forming technique using hardwood and softwood pulps with varying chemical composition, ultrastructural, and morphological properties as raw materials. The sound absorption properties of the produced foams were measured and related to the ultrastructure and the morphology of the pulp fibres. All the fibre foams provided sound absorption properties comparable to those of conventional porous materials used for acoustic purposes. In general, further processing, as well as smaller fibre dimensions contribute to improve the sound absorption properties of the pulp fibre foams. The results provide valuable insight on the optimization of wood-based sound absorbing materials. Graphic abstract

Sound-absorbing materials are usually measured in a reverberation chamber (diffuse field condition) or in an impedance tube (normal sound incidence). In this paper, we show how angle-dependent absorption coefficients could be measured in a factory-type setting. The results confirm that the materials have different attenuation behavior to sound waves coming from different directions. Furthermore, the results are in good agreement with sound absorption coefficients measured for comparison in a reverberation room and in an impedance tube. In addition, we introduce a biofiber-based material that has similar sound absorption characteristics to glass-wool. The angle-dependent absorption coefficients are important information in material development and in room acoustics modeling.

Novel and more sustainable sound absorbing materials are produced through the valorization of waste biomass sources by following circular economy principles. Cellulosic nanocrystals (CNC) were extracted from Posidonia oceanica dead leaves, spent barely grains, and kale stems using a simplified purification protocol. These nanocrystals are used to prepare cellulosic aerogels, evaluating the effect of three parameters, namely, concentration (0.5–4%), CaCl2 and poly(lactic acid) (PLA) incorporation (hybrid aerogels), on their sound absorption properties. Aerogels from 4% suspensions show the highest sound absorption, outperforming benchmark rockwool and polyester—two modern commonly‐used sound absorbers. Moreover, PLA coating also improves the sound absorption performance of the most aerogels. CNC from KS aerogels are selected as the optimum at both high (500–6000 Hz) and low (100–1500 Hz) frequency ranges. Overall, these results represent a new proof‐of‐concept of waste biomass conversion to high‐performance cellulosic aerogels that have excellent sound absorbing properties.