Desulfurization of the gases from coal combustion was studied, using limestone (marble) as the sorbent in a fluidized-bed reactor. The kinetic parameter, k, was measured by analyzing the reduction in SO2 emissions in relation to time when a batch of limestone was introduced directly into the combustor chamber. The influence of sorbent composition and particle size was also studied. The CaO content in the limestone was more important than the MgO content. Sorbent particle size showed a strong influence on the reaction time and efficiency of desulfurization. The results of this work prove that marble type is very important in the choice of sorbent for a desulfurization process. A magnesian limestone showed a better performance than a dolomite. Therefore, the magnesian limestone is more efficient for a shorter particle residence time, which is characteristic of the bubbling fluidized bed
-A metamorphic limestone and a dolomite were employed as SO 2 sorbents in the desulfurization of gas from coal combustion. The tests were performed in a fluidized bed reactor on a bench and pilot scale. Several parameters such as bed temperature, sorbent type, and sorbent particle size at different Ca/S molar ratios were analyzed. These parameters were evaluated for the combustion of coal with low-sulfur/high-ash content, experimental conditions of high air excess and high O 2 level in fluidization air. Under these conditions, typical of furnaces, few published data can be found. In this work, a medium level of desulfurization efficiency (~60%) for Ca/S = 2 was obtained.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.