Spatially curved Al-extrusion profiles are often used for lightweight frame structures in vehicle manufacturing. Within the Collaborative Research Centre SFB/ Transregio 10, an automated product-flexible process chain is established in order to produce and machine such profiles and to join them into frame structures. One of the biggest challenges of this process chain consists in handling, clamping and machining variably formed profiles with precision and without having to change the mechanical system. For this, both the contour of the profile and the position and orientation of the profile during the process have to be determined. In order to have this information provided from inside the process chain, a component-specific scale was developed and realised for the contour detection and precision positioning of multi-dimensionally curved extrusion profiles. The scale is applied onto the surface of the profile by a laser. To determine the contour, the scale is scanned using digital image processing and the profile is measured by a laser triangulation sensor. This establishes the relation between component scale and profile contour. If required, the position of the profile can be readjusted by scanning individual markings again during machining. It is not necessary to re-measure the entire profile contour. The process can be used for different profile contours and profile lengths without having to change the mechanical system. The first section of this article describes the approach for contour detection and precision positioning and its validation for straight profiles, 2D curved profiles and 3D curved profiles with a test rig.Then, the implementation of the validated process into a process chain is described, including the inline application of the scale, the inline profile measuring and the precision positioning of spatially curved profiles during machining.
Kurzfassung
Im Rahmen des Sonderforschungsbereich Transregio 10 (SFB/TR 10) „Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen“ wird eine Prozesskette zur produktflexiblen Kleinserienfertigung von Space-Frame-Rahmenstrukturen aufgebaut. An diesem Forschungsprojekt sind Institute der Technischen Universität Dortmund, der Technischen Universität München und der Universität Karlsruhe (TH) beteiligt. Um bereits frühzeitig die Qualität und die Zuverlässigkeit der Prozesskette zu verbessern, wurde in einem standortübergreifenden Qualitätsarbeitskreis eine System-FMEA Prozess für die einzelnen Teilprozesse durchgeführt. Mit dieser konnten projektbegleitend potenzielle Fehlerschwerpunkte ermittelt und gezielt Gegenmaßnahmen eingeleitet werden. Im folgenden Artikel werden die eingeleiteten Fehlervermeidungsmaßnahmen für die am SFB/TR 10 beteiligten Prozesse und Verfahren beschrieben. Die Prozesse sind im Einzelnen: Das mehrachsige Runden beim Strangpressen sowie das darauf folgende fliegende Abtrennen zur Herstellung der Rahmenelemente, eine flexible und intelligente Greiftechnik in Kombination mit einer Handhabungs- und Bearbeitungskinematik zur spanenden Bearbeitung sowie als letzte Schritte die Verfahren Innenhochdruckfügen, Rührreibschweißen und Laserstrahlschweißen zum Fügen der Einzelteile zu einer Rahmenstruktur.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.