The processing steps necessary to prepare a potential accident-tolerant fuel composite consisting of uranium mononitride (UN) combined with uranium sesquisilicide (U 3 Si 2) are described. Liquid phase sintering was performed with U 3 Si 2 as the liquid phase combined with UN powder or UN m-spheres. Various UN to U 3 Si 2 ratios were tested which resulted in up to 94% dense pellets. Composite UN-U 3 Si 2 samples had greater than 30% more uranium content than UO 2 .
Magnetoelastic dilatometry of the piezomagnetic antiferromagnet UO2 was performed via the fiber Bragg grating method in magnetic fields up to 150 T generated by a single-turn coil setup. We show that in microsecond timescales, pulsed-magnetic fields excite mechanical resonances at temperatures ranging from 10 to 300 K, in the paramagnetic as well as within the robust antiferromagnetic state of the material. These resonances, which are barely attenuated within the 100-µs observation window, are attributed to the strong magnetoelastic coupling in UO2 combined with the high crystalline quality of the single crystal samples. They compare well with mechanical resonances obtained by a resonant ultrasound technique and superimpose on the known nonmonotonic magnetostriction background. A clear phase shift of π in the lattice oscillations is observed in the antiferromagnetic state when the magnetic field overcomes the piezomagnetic switch field Hc=−18 T. We present a theoretical argument that explains this unexpected behavior as a result of the reversal of the antiferromagnetic order parameter at Hc.
Polycrystalline materials can have complex anisotropic properties depending on their crystallographic texture and crystal structure. In this study, we use resonant ultrasound spectroscopy (RUS) to nondestructively quantify the elastic anisotropy in extruded aluminum alloy 1100-O, an inherently low-anisotropy material. Further, we show that RUS can be used to indirectly provide a description of the material’s texture, which in the present case is found to be transversely isotropic. By determining the entire elastic tensor, we can identify the level and orientation of the anisotropy originated during extrusion. The relative anisotropy of the compressive (c11/c33) and shear (c44/c66) elastic constants is 1.5% ± 0.5% and 5.7% ± 0.5%, respectively, where the elastic constants (five independent elastic constants for transversely isotropic) are those associated with the extrusion axis that defines the symmetry of the texture. These results indicate that the texture is expected to have transversely isotropic symmetry. This finding is confirmed by two additional approaches. First, we confirm elastic constants and the degree of elastic anisotropy by direct sound velocity measurements using ultrasonic pulse echo. Second, neutron diffraction (ND) data confirm the symmetry of the bulk texture consistent with extrusion-induced anisotropy, and polycrystal elasticity simulations using the elastic self-consistent model with input from ND textures and aluminum single-crystal elastic constants render similar levels of polycrystal elastic anisotropy to those measured by RUS. We demonstrate the ability of RUS to detect texture-induced anisotropy in inherently low-anisotropy materials. Therefore, as many other common materials have intrinsically higher elastic anisotropy, this technique should be applicable for similar levels of texture, providing an efficient general diagnostic and characterization tool.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.