We report a contraction-expansion array (CEA) microchannel device that performs label-free high-throughput separation of cancer cells from whole blood at low Reynolds number (Re). The CEA microfluidic device utilizes hydrodynamic field effect for cancer cell separation, two kinds of inertial effects: (1) inertial lift force and (2) Dean flow, which results in label-free size-based separation with high throughput. To avoid cell damages potentially caused by high shear stress in conventional inertial separation techniques, the CEA microfluidic device isolates the cells with low operational Re, maintaining high-throughput separation, using nondiluted whole blood samples (hematocrit ~45%). We characterized inertial particle migration and investigated the migration of blood cells and various cancer cells (MCF-7, SK-BR-3, and HCC70) in the CEA microchannel. The separation of cancer cells from whole blood was demonstrated with a cancer cell recovery rate of 99.1%, a blood cell rejection ratio of 88.9%, and a throughput of 1.1 × 10(8) cells/min. In addition, the blood cell rejection ratio was further improved to 97.3% by a two-step filtration process with two devices connected in series.

In this study, we developed a novel nanostructured polymer nanofiber/TiO 2 nanoparticle composite photoelectrode with high bendability by a spray-assisted electrospinning method. The composite film is used as the photoelectrode in plastic dye-sensitized solar cells (DSCs). The polymer/TiO 2 composite photoelectrode has a structure similar to that of a fiber-reinforced composite; the matrix of the composite photoelectrode contains TiO 2 nanoparticles, and PVDF nanofibers are embedded in this matrix. Compared to conventional DSCs, composite-based DSCs show outstanding bending stability because the polymer nanofibers prevent delamination of the electrode by relieving the external stress and effectively retarding crack generation and propagation. Moreover, the efficiency of the cell containing composite electrodes is comparable to that of a cell containing only TiO 2 , suggesting that the proposed PVDF-nanofiber-reinforced photoelectrode is a promising candidate for a bendable photoelectrode in high-efficiency flexible plastic DSCs.

This paper presents a pressed paper-based dipstick that enables detection of foodborne pathogens with multistep reactions by exploiting the delayed fluid flow and channel partition formation on nitrocellulose (NC) membrane. Fluid behaviors are easily modified by controlling the amount of pressure and the position of pressed region on the NC membrane. Detection region of the dipstick is optimized by controlling flow rate and delayed time based on Darcy's law. All the reagents required for assay are dried on the NC membrane and they are sequentially rehydrated at the prepartitioned regions when the device is dipped into sample solution. In this manner, multistep reactions can be facilitated by one-step dipping of the dipstick into the sample solution. As a proof of concept, we performed detection of two fatal foodborne pathogens (e.g., Escherichia coli O157:H7 and Salmonella typhimurium) with signal enhancement. In addition, we expanded the utilization of channel partitions by developing a pressed paper-based dipstick into dual detection format.

No abstract

This paper reports a method to control the fluid flow in paper-based microfluidic devices simply by pressing over the channel surface of paper, thereby decreasing the pore size and permeability of a non-woven polypropylene sheet. As a result, fluid resistance is increased in the pressed region and causes flow rate to decrease. We characterize the decrease of flow rate with respect to different amounts of pressure applied, and up to 740% decrease in flow velocity was achieved. In addition, we demonstrate flow rate control in a Y-shaped merging paper and sequential delivery of multiple color dyes in a three-branched paper. Furthermore, sequential delivery of multiple fluid samples is performed to demonstrate its application in multi-step colorimetric immunoassay, which shows a 4.3-fold signal increase via enhancement step. V C 2014 AIP Publishing LLC.

No abstract

This paper presents a handheld device that is capable of simplifying multistep assays to perform sensitive detection of foodborne pathogens. The device is capable of multiplexed detection of Escherichia coli (E. coli) O157:H7, Salmonella Typhimurium (S. Typhimurium), Staphylococcus aureus, and Bacillus cereus. The limit of detection for each bacterium was characterized, and then, the detection of bacteria from contaminated fresh lettuces was demonstrated for two representative foodborne pathogens. We employed a sample pretreatment protocol to recover and concentrate target bacteria from contaminated lettuces, which can detect 1.87 × 10 CFU of E. coli O157:H7 and 1.47 × 10 CFU of S. Typhimurium/1 g of lettuce without an enrichment process. Lastly, we demonstrated that the limit of detection can be reduced to 1 CFU of E. coli O157:H7 and 1 CFU of S. Typhimurium/1 g of lettuce by including a 6 h enrichment of contaminated lettuces in growth media before pretreatment.

This paper demonstrates an inertia-activated cell sorting method to separate cells based on their surface protein expression by using inertial microfluidics.