No abstract

No abstract

No abstract

Hydro-conversion reactions were carried out at 360°C under 5 MPa of H 2 pressure to study ring-opening reactions of 1-methyl naphthalene using NiMoS supported on γ-alumina and alumina-coated/mixed USY zeolites. The catalysts were characterized using N 2-BET, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), pyridine FT-IR, and high-resolution transmission electron microscopy (HRTEM) to study the influence of morphological and acidic properties on hydrogenation (HYD) and hydrocracking (HC) reactions. NMACZ-2 (NiMoS supported on the minimum amount of alumina-coated USY zeolite) showed enhanced reactivity for HC and produced (alkyl)benzenes with the highest yield, of ca. 80%. By-products were tetralin, decalin and cyclo-paraffin species. The tetralin species produced using NMACZ-2 moved into the alumina-coated USY zeolite support before undergoing HYD to produce decalin species, which were rapidly and selectively hydro-cracked into (alkyl)benzenes. A large amount of decalin was produced through the HYD of tetralin without significant cracking, possibly due to the weak acid character of γ-alumina. Bulk-phase Mo oxide species on NMAZ (physical mixture of alumina and USY zeolite), as well as deactivation of the catalysts due to coke formation over the naked zeolite surface, inhibited the ring opening of tetralin, decreasing the yield of (alkyl) benzene. 3 Various morphologies, such as the MoS 2 structure and acidic characteristics of the catalysts, were crucial factors affecting the HC reactivity of 1-methyl naphthalene.

Design of catalytic materials has been highlighted to build ultraclean use of heavy oil including liquid-to-gas technology to directly convert heavy hydrocarbons into H2–rich gas fuels. If the H2 is produced from such heavy oil through high-active and durable catalysts in reforming process that is being constructed in hydrogen infrastructure, it will be addressed into renewable energy systems. Herein, the three different hollow fiber catalysts networked with perovskite nanoparticles, LaCr0.8Ru0.2O3, LaCr0.8Ru0.1Ni0.1O3, and LaCr0.8Ni0.2O3 were prepared by using activated carbon fiber as a sacrificial template for H2 production from heavy gas oil reforming. The most important findings were arrived at: (i) catalysts had hollow fibrous architectures with well-crystallized structures, (ii) hollow fibers had a high specific surface area with a particle size of ≈50 nm, and (iii) the Ru substituted ones showed high efficiency for H2 production with substantial durability under high concentrations of S, N, and aromatic compounds.