Resumo Diversos modelos matemáticos da laminação de encruamento foram desenvolvidos, porém poucos demonstram a distribuição de tensões no interior da tira dentro do arco de contato e após sair do mesmo. Os modelos desenvolvidos em elementos finitos permitem determinar essas tensões internas de forma bastante precisa. O modelamento, porém, da laminação de encruamento em elementos finitos não é tarefa simples, envolvendo a aplicação correta das condições de contorno, entrada da propriedade do material da tira, discretização da chapa e principalmente do cilindro de trabalho e mais alguns ajustes numéricos. O presente trabalho apresenta detalhadamente o modelamento da laminação de encruamento no programa de elementos finitos Simulia Abaqus explícito dinâmico, baseado em um laminador real industrial e resultados são comparados ao final. Observa-se a necessidade de continuar a ajustar o modelo para se conseguir uma melhor precisão. Palavras-chave:Laminação de Encruamento; Método dos Elementos Finitos; Simulação; Carga de Laminação TEMPER ROLLING PROCESS MODELING WITH THE FINITE ELEMENT METHOD Abstract Several mathematical models of the temper rolling process have been developed, but only a few demonstrate the distribution of stresses inside the strip within the arc of contact and in the outgoing strip. The models developed in finite elements allow to determine these internal tensions in a very precise way. The modeling, however, of the finite element temper rolling process is not a simple task, involving the correct application of the boundary conditions, strip's material properties input, discretization of the strip and especially of the working roll and some numerical adjustments. The present work presents in detail the temper rolling modeling in the finite element program Simulia Abaqus explicit-dynamic, based on an actual industrial temper rolling mill and results are compared at the end.There is a need to continue adjusting the model to achieve better accuracy.
Versão de trabalho apresentado na ABM Week 2018 2176-1523 © 2019 Associação Brasileira de Metalurgia, Materiais e Mineração. Publicado pela ABM. Este é um artigo de acesso aberto distribuído sob os termos da licença Creative Commons CC BY-NC-ND (Attribution-NonCommercial-NoDerivs) -https:// creativecommons.org/licenses/by-nc-nd/4.0/. a ResumoDiversos modelos matemáticos da laminação de encruamento foram desenvolvidos, porém poucos demonstram a distribuição de tensões no interior da tira dentro do arco de contato e após sair do mesmo. Os modelos desenvolvidos em elementos finitos permitem determinar essas tensões internas de forma bastante precisa. O modelamento, porém, da laminação de encruamento em elementos finitos não é tarefa simples, envolvendo a aplicação correta das condições de contorno, entrada da propriedade do material da tira, discretização da chapa e principalmente do cilindro de trabalho e mais alguns ajustes numéricos. O presente trabalho apresenta o modelamento da laminação de encruamento no programa de elementos finitos Simulia Abaqus explícito dinâmico, baseado em um laminador real industrial e resultados são comparados ao final. Ajustando-se o modelo obteve-se um valor de carga 0,2% menor que o medido. São feitas, também, considerações sobre o arco de contato e a distribuição interna de tensões. Palavras-chave: Laminação de encruamento; Método dos elementos finitos; Simulação; Carga de laminação Abstract Several mathematical models of the temper rolling process have been developed, but only a few demonstrate the distribution of stresses inside the strip within the arc of contact and in the outgoing strip. The models developed in finite elements allow to determine these internal tensions in a very precise way. The modeling, however, of the finite element temper rolling process is not a simple task, involving the correct application of the boundary conditions, strip's material properties input, discretization of the strip and especially of the working roll and some numerical adjustments. The present work presents the temper rolling modeling in the finite element program Simulia Abaqus explicit-dynamic, based on an actual industrial temper rolling mill and results are assessed. Adjusting the numerical model a rolling load 0,2% less was obtained. Arc of contact profile and internal stresses of the strip are shown.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.