We provide a C/C++ software for the shape analysis of deflated elastic capsules in a pendant capsule geometry, which is based on an elastic description of the capsule material as a quasi two-dimensional elastic membrane using shell theory. Pendant capsule elastometry provides a new in situ and non-contact method for interfacial rheology of elastic capsules that goes beyond determination of the Gibbs- or dilational modulus from area-dependent measurements of the surface tension using pendant drop tensiometry, which can only give a rough estimate of the elastic capsule properties as they are based on a purely liquid interface model. Given an elastic model of the capsule membrane, pendant capsule elastometry determines optimal elastic moduli by fitting numerically generated axisymmetric shapes optimally to an experimental image. For each digitized image of a deflated capsule elastic moduli can be determined, if another image of its undeformed reference shape is provided. Within this paper, we focus on nonlinear Hookean elasticity because of its low computational cost and its wide applicability, but also discuss and implement alternative constitutive laws. For Hookean elasticity, Young's surface modulus (or, alternatively, area compression modulus) and Poisson's ratio are determined; for Mooney-Rivlin elasticity, the Rivlin modulus and a dimensionless shape parameter are determined; for neo-Hookean elasticity, only the Rivlin modulus is determined, using a fixed dimensionless shape parameter. Comparing results for different models we find that nonlinear Hookean elasticity is adequate for most capsules. If series of images are available, these moduli can be evaluated as a function of the capsule volume to analyze hysteresis or aging effects depending on the deformation history or to detect viscoelastic effects for different volume change rates. An additional wrinkling wavelength measurement allows the user to determine the bending modulus, from which the layer thickness can be derived. We verify the method by analyzing several materials, compare the results to available rheological measurements, and review several applications. We make the software available under the GPL license at github.com/jhegemann/opencapsule.
There is an emerging trend towards the fabrication of microcapsules at liquid interfaces. In order to control the parameters of such capsules, the interfacial processes governing their formation must be understood. Here, poly(vinyl alcohol) films are assembled at the interface of water-in-oil microfluidic droplets. The polymer is cross-linked using cucurbit[8]uril ternary supramolecular complexes. It is shown that compression-induced phase change causes the onset of buckling in the interfacial film. On evaporative compression, the interfacial film both increases in density and thickens, until it reaches a critical density and a phase change occurs. We show that this increase in density can be simply related to the film Poisson ratio and area compression. This description captures fundamentals of many compressive interfacial phase changes and can also explain the observation of a fixed thickness-to-radius ratio at buckling, (T/R).
We investigate the deformation of elastic microcapsules adsorbed at liquid-liquid interfaces. An initially spherical elastic capsule at a liquid-liquid interface undergoes circumferential stretching due to the liquid-liquid surface tension and becomes lens- or discus-shaped, depending on its bending rigidity. The resulting elastic capsule deformation is qualitatively similar, but distinct from the deformation of a liquid droplet into a liquid lens at a liquid-liquid interface. We discuss the deformed shapes of droplets and capsules adsorbed at liquid-liquid interfaces for a whole range of different surface elasticities: from droplets (only surface tension) deforming into liquid lenses, droplets with a Hookean membrane (finite stretching modulus, zero bending modulus) deforming into elastic lenses, to microcapsules (finite stretching and bending modulus) deforming into rounded elastic lenses. We calculate capsule shapes at liquid-liquid interfaces numerically using shape equations from nonlinear elastic shell theory. Finally, we present theoretical results for the contact angle (or the capsule height) and the maximal capsule curvature at the three phase contact line. These results can be used to infer information about the elastic moduli from optical measurements. During capsule deformation into a lens-like shape, surface energy of the liquid-liquid interface is converted into elastic energy of the capsule shell giving rise to an overall adsorption energy gain by deformation. Soft hollow capsules exhibit a pronounced increase of the adsorption energy as compared to filled soft particles and, thus, are attractive candidates as foam and emulsion stabilizers.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.