No abstract

Ferroelectric materials exhibit a phase transition to a paraelectric state driven by temperature - called the Curie transition. In conventional ferroelectrics, the Curie transition is caused by a change in crystal symmetry, while the material itself remains a continuous three-dimensional solid crystal. However, ferroelectric polymers behave differently. Polymeric materials are typically of semi-crystalline nature, meaning that they are an intermixture of crystalline and amorphous regions. Here, we demonstrate that the semi-crystalline morphology of the ferroelectric copolymer of vinylidene fluoride and trifluoroethylene (P(VDF-TrFE)) strongly affects its Curie transition, as not only a change in crystal symmetry but also in morphology occurs. We demonstrate, by high-resolution nanomechanical measurements, that the semi-crystalline microstructure in the paraelectric state is formed by crystalline domains embedded into a softer amorphous phase. Using in situ X-ray diffraction measurements, we show that the local electromechanical response of the crystalline domains is counterbalanced by the amorphous phase, effectively masking its macroscopic effect. Our quantitative multi-scale characterisations unite the nano- and macroscopic material properties of the ferroelectric polymer P(VDF-TrFE) through its semi-crystalline nature.

Piezoelectricity in ferroelectrics arises from electrostriction biased by their spontaneous polarisation, which can be enhanced through a bias-induced polarisation. Doing so, the piezoelectric response can be tuned and significantly enhanced. In this study, the ferroelectric polymer P(VDF-TrFE) was used to electro-mechanically excite a silicon microcantilever. Using this device, we demonstrate that a bias-induced polarisation improves the piezoelectric response of P(VDF-TrFE). To distinguish between the linear piezoelectric and quadratic electrostrictive effect, lock-in measurements were performed in order to separate the characteristic frequency response of both electro-mechanical phenomena. This work shows the potential for MEMS devices having controllable actuating and sensing properties. IMPACT STATEMENT The non-linear nature of the strong electrostrictive effect observed in ferroelectric polymers was used to enhance and control its piezoelectric activity by an electric field. A large and tunable piezoelectric response was verified in polymer-based MEMS resonators, proving the ability to tailor their actuating and sensing properties.

No abstract

Recently, organic electromechanical transducers have attracted intense scientific and technological interest due to their unique mechanical flexibility and their piezoelectric properties. However, the fabrication of organic MEMS devices is challenging. For example, a lift-off process cannot be used on polymers, because of the solvent in photoresists. Here, we present a straightforward and low-cost batch process for organic MEMS devices using standard micromachining techniques. As organic material we used the ferroelectric (co-)polymer poly(vinylidene fluoride-trifluorethylene) (P(VDF-TrFE)). The integration of the polymer in a CMOS-compatible process was optimized in terms of deposition and patterning of the polymer and the corresponding metal layers. Micromachined devices, such as capacitors and cantilevers, were fabricated and analysed. The ferroelectric perfomance was evaluated by electrical and electromechanical measurements. Our first results indicate that the proposed fabrication process is reliable resulting in well-functioning organic MEMS devices. We measured as piezoelectric constant a d33 of −32 pm/V with our organic P(VDF-TrFE) capacitors.