Recebido em 27/11/12; aceito em 24/6/13; publicado na web em 2/8/13The influence of the composition and preparation method on the sol-gel transition temperature (T sol-gel ) and rheological response of poloxamer-based formulations was determined. Manual and more complex mechanical stirring were found to provide similar results. In addition, a linear dependence of T sol-gel on the poloxamer content was observed in the range of concentrations analyzed, and a Poloxamer 407 ® concentration of 18% was selected. The addition of hyaluronic acid did not lead to significant changes in the T sol-gel values. In contrast, the addition of microparticles caused a reduction in T sol-gel without a significant reduction in gel strength, and pseudoplastic characteristics were observed, indicating that a thermoreversible gel was obtained with a rheology suitable for application in the treatment of burn wounds.
Bentonite clay is surface modified and incorporated into PC/ABS (70/30) polymer blend by melt mixing in concentrations of 1, 3 and 5 wt% of clay. The efficiency of the treatments is analyzed by Fourier transform infrared spectroscopy (FTIR), x‐ray fluorescence (XRF) and x‐ray diffraction (XRD). Differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) are used to evaluate the blends miscibility and morphology, respectively, and the mechanical behavior is analyzed by tensile tests. The methodologies used are efficient to modify the clay's surface. DSC and SEM showed that the blend remained immiscible with the addition of the fillers. The mechanical test showed an increase in the Young's modulus of the nanocomposite with addition of 1 wt% of the natural clay and a modification in the fracture behavior of the blend, from ductile to brittle, when 3 and 5 wt% of the organophilized clay are used.
In this work, a comparative study evaluating the influence of different functionalization of carbon nanotubes on the properties of nanocomposites with polymeric matrix was performed. A 50/50 wt% polycarbonate (PC)/poly(acrylonitrile-butadiene-styrene) (ABS) blend was used as polymeric matrix of the nanocomposites. The comparison was made between nanocomposites reinforced with covalently functionalized multiwall carbon nanotubes (MWCNTf) and MWCNTf/nanoclay hybrid functionalization. The effect on the mechanical and morphological properties of the nanocomposites was evaluated through tensile and Izod impact tests and scanning electron microscopy and transmission electron microscopy (TEM) analyses. The thermal characterization of PC/ABS blends and nanocomposites was performed by differential scanning calorimetry (DSC). Results showed that both methods of functionalization of MWCNTs increased the stiffness and impact resistance of the nanocomposites. TEM micrographs indicated the preferred location of the reinforcements in the SAN phase of ABS. Results from DSC indicated an increase in the thermal resistance of the nanocomposites.
A organofilização de argilas bentonitas com sal quaternário de amônio foi avaliada como meio de se obter nanopartículas de argila atuando como reforço em nanocompósitos com matriz de policarbonato/poli(acrilonitrila-butadieno-estireno). A caracterização por difração de raios-x da argila organofilizada mostra um aumento no espaçamento basal da montmorilonita quando comparada a argila natural. Os espectros de espectroscopia de infravermelho com transformada de Fourrier confirmaram a troca dos cátions inorgânicos da argila natural pelos cátions orgânicos de amônio do modificador orgânico. Os nanocompósitos foram preparados por mistura no estado fundido em uma extrusora monorosca. Os resultados mostraram um aumento de 49% na resistência ao impacto com a adição de 1% em massa de argila organofílica nos nanocompósitos quando comparado a blenda sem reforço. Imagens obtidas por microscopia eletrônica de varredura mostraram um refinamento na morfologia co-contínua da blenda policarbonato/acrilonitrila-butadieno-estireno com a adição de 1% em massa de argila organofílica.
As fibras naturais se mostram vantajosas na utilização em compósitos por possuírem baixa massa específica, baixa abrasividade, custo reduzido, serem biodegradáveis e possuir caráter autossustentável, uma vez que sua fonte é renovável e, no ponto de vista comercial, tem resultados bastante promissores. As fibras utilizadas neste trabalho foram separadas conforme sua granulometria e o compósito foi preparado utilizando o polipropileno como matriz polimérica e foi utilizada a concentração de 10% de fibra para todas as variações granulométricas. Os compósitos foram caracterizados através de análise termogravimétrica, a qual mostrou que a adição da fibra na matriz polimérica melhora a estabilidade térmica do material, especialmente as fibras de menor granulometrias. Através das curvas da derivada da variação de massa foi possível observar que a temperatura do ponto máximo do compósito reforçado com fibras menores chegou a aumentar aproximadamente 30°C quando comparado com o polímero puro. Além disso, os materiais compósitos e o polímero puro foram caracterizados por calorimetria exploratória diferencial, ensaios de tração e microscopia eletrônica de varredura. Os ensaios de tração mostraram uma redução de aproximadamente 20% da tensão máxima suportada, o que poderia ser explicado pela fraca adesão entre fibra e matriz.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.