A person seeking another person's attention is normally able to quickly assess how interruptible the other person currently is. Such assessments allow behavior that we consider natural, socially appropriate, or simply polite. This is in sharp contrast to current computer and communication systems, which are largely unaware of the social situations surrounding their usage and the impact that their actions have on these situations. If systems could model human interruptibility, they could use this information to negotiate interruptions at appropriate times, thus improving human computer interaction.This article presents a series of studies that quantitatively demonstrate that simple sensors can support the construction of models that estimate human interruptibility as well as people do. These models can be constructed without using complex sensors, such as vision-based techniques, and therefore their use in everyday office environments is both practical and affordable. Although currently based on a demographically limited sample, our results indicate a substantial opportunity for future research to validate these results over larger groups of office workers. Our results also motivate the development of systems that use these models to negotiate interruptions at socially appropriate times.

No abstract

Video projectors have typically been used to display images on surfaces whose geometric relationship to the projector remains constant, wuch as walls or pre-calibrated surfaces. In this paper, we present a technique for projecting content onto moveable surfaces that adapts to the motion and location of the surface to simulate an active display. This is accomplished using a projector based location tracking technique. We use light sensors embedded into the moveable surface and project low-perceptibility Gray-coded patterns to first discover the sensor locations, and then imcrementally track them at interactive rates. We describe how to reduce the perceptibility of tracking patterns, achieve interactive tracking rates, use motion modeling to improve tracaking performance, and respond to sensor occlusions. A group of tracked sensors can define quadrangles for simulating moveable displays while single sensors can be used as control inputs. By unifying the tracking and display technology into a single mechanism, we can substantially reduce the cost and complexity of implementing applications that combine motion tracking and projected imagery. ACM Symposium on User Interface Software & Technology (UIST)This work may not be copied or reproduced in whole or in part for any commercial purpose. Permission to copy in whole or in part without payment of fee is granted for nonprofit educational and research purposes provided that all such whole or partial copies include the following: a notice that such copying is by permission of Mitsubishi Electric Research Laboratories, Inc.; an acknowledgment of the authors and individual contributions to the work; and all applicable portions of the copyright notice. Copying, reproduction, or republishing for any other purpose shall require a license with payment of fee to Mitsubishi Electric Research Laboratories, Inc. All rights reserved. Video projectors have typically been used to display images on surfaces whose geometric relationship to the projector remains constant, such as walls or pre-calibrated surfaces.In this paper, we present a technique for projecting content onto moveable surfaces that adapts to the motion and location of the surface to simulate an active display. This is accomplished using a projector based location tracking techinque. We use light sensors embedded into the moveable surface and project low-perceptibility Graycoded patterns to first discover the sensor locations, and then incrementally track them at interactive rates. We describe how to reduce the perceptibility of tracking patterns, achieve interactive tracking rates, use motion modeling to improve tracking performance, and respond to sensor occlusions. A group of tracked sensors can define quadrangles for simulating moveable displays while single sensors can be used as control inputs. By unifying the tracking and display technology into a single mechanism, we can substantially reduce the cost and complexity of implementing applications that combine motion tracking and projected imagery.

Projection technology typically places several constraints on the geometric relationship between the projector and the projection surface to obtain an undistorted, properly sized image. In this paper we describe a simple, robust, fast, and low-cost method for automatic projector calibration that eliminates many of these constraints. We embed light sensors in the target surface, project Gray-coded binary patterns to discover the sensor locations, and then prewarp the image to accurately fit the physical features of the projection surface. This technique can be expanded to automatically stitch multiple projectors, calibrate onto nonplanar surfaces for object decoration, and provide a method for simple geometry acquisition. UIST 2004This work may not be copied or reproduced in whole or in part for any commercial purpose. Permission to copy in whole or in part without payment of fee is granted for nonprofit educational and research purposes provided that all such whole or partial copies include the following: a notice that such copying is by permission of Mitsubishi Electric Research Laboratories, Inc.; an acknowledgment of the authors and individual contributions to the work; and all applicable portions of the copyright notice. Copying, reproduction, or republishing for any other purpose shall require a license with payment of fee to Mitsubishi Electric Research Laboratories, Inc. All rights reserved. ABSTRACTProjection technology typically places several constraints on the geometric relationship between the projector and the projection surface to obtain an undistorted, properly sized image. In this paper we describe a simple, robust, fast, and low-cost method for automatic projector calibration that eliminates many of these constraints. We embed light sensors in the target surface, project Gray-coded binary patterns to discover the sensor locations, and then prewarp the image to accurately fit the physical features of the projection surface. This technique can be expanded to automatically stitch multiple projectors, calibrate onto nonplanar surfaces for object decoration, and provide a method for simple geometry acquisition.

In this paper we present a system for providing tactile feedback for stylus-based touch-screen displays. The Haptic Pen is a simple low-cost device that provides individualized tactile feedback for multiple simultaneous users and can operate on large touch screens as well as ordinary surfaces. A pressure-sensitive stylus is combined with a small solenoid to generate a wide range of tactile sensations. The physical sensations generated by the Haptic pen can be used to enhance our existing interaction with graphical user interfaces as well as to help make modern computing systems more accessible to those with visual or motor impairments.

Kinetic typography -text that uses movement or other temporal change -has recently emerged as a new form of communication. As we hope to illustrate in this paper, kinetic typography can be seen as bringing some of the expressive power of film -such as its ability to convey emotion, portray compelling characters, and visually direct attention -to the strong communicative properties of text. Although kinetic typography offers substantial promise for expressive communications, it has not been widely exploited outside a few limited application areas (most notably in TV advertising). One of the reasons for this has been the lack of tools directly supporting it, and the accompanying difficulty in creating dynamic text. This paper presents a first step in remedying this situation -an extensible and robust system for animating text in a wide variety of forms. By supporting an appropriate set of carefully factored abstractions, this engine provides a relatively small set of components that can be plugged together to create a wide range of different expressions. It provides new techniques for automating effects used in traditional cartoon animation, and provides specific support for typographic manipulations.

Toolkits and other tools have dramatically reduced the time and technical expertise needed to design and implement graphical user interfaces (GUIs) allowing high-quality, iterative, user-centered design to become a common practice. Unfortunately the generation of functioning prototypes for physical interactive devices as not had similar support -it still requires substantial time and effort by individuals with highly specialized skills and tools. This creates a divide between a designers' ability to explore form and interactivity of product designs and the ability to iterate on the basis of high fidelity interactive experiences with a functioning prototype. To help overcome this difficulty we have developed the Calder hardware toolkit. Calder is a development environment for rapidly exploring and prototyping functional physical interactive devices. Calder provides a set of reusable small input and output components, and integration into existing interface prototyping environments. These components communicate with a computer using wired and wireless connections. Calder is a tool targeted toward product and interaction designers to aid them in their early design process. In this paper we describe the process of gaining an understanding of the needs and workflow habits of our target users to generate a collection of requirements for such a toolkit. We describe technical challenges imposed by these needs, and the specifics of design and implementation of the toolkit to meet these challenges.

No abstract