A detailed investigation of the effect of hole transport material (HTM) pore filling on the photovoltaic performance of solid‐state dye‐sensitized solar cells (ss‐DSCs) and the specific mechanisms involved is reported. It is demonstrated that the efficiency and photovoltaic characteristics of ss‐DSCs improve with the pore filling fraction (PFF) of the HTM, 2,2’,7,7’‐tetrakis‐(N, N ‐di‐ p ‐methoxyphenylamine)9,9’‐spirobifluorene(spiro‐OMeTAD). The mechanisms through which the improvement of photovoltaic characteristics takes place were studied with transient absorption spectroscopy and transient photovoltage/photocurrent measurements. It is shown that as the spiro‐OMeTAD PFF is increased from 26% to 65%, there is a higher hole injection efficiency from dye cations to spiro‐OMeTAD because more dye molecules are covered with spiro‐OMeTAD, an order‐of‐magnitude slower recombination rate because holes can diffuse further away from the dye/HTM interface, and a 50% higher ambipolar diffusion coefficient due to an improved percolation network. Device simulations predict that if 100% PFF could be achieved for thicker devices, the efficiency of ss‐DSCs using a conventional ruthenium‐dye would increase by 25% beyond its current value.

No abstract

No abstract

Photoelectrochemical cells (PECs) have been studied extensively for dissociating water into hydrogen and oxygen. Key bottlenecks for achieving high solar-to-hydrogen efficiency in PECs include increasing solar spectrum utilization, surmounting overpotential losses, and aligning the absorber/electrochemical redox levels. We propose a new class of solid-state PECs based on mixed ionic and electronic conducting (MIEC) oxides that operates at temperatures significantly above ambient and utilizes both the light and thermal energy available from concentrated sunlight to dissociate water vapor. Unlike thermochemical and hybrid photo-thermochemical water-splitting routes, the elevated-temperature PEC is a single-step approach operating isothermally. At the heart of the solid-state PEC is a semiconductor light absorber coated with a thin MIEC layer for improved catalytic activity, electrochemical stability, and ionic conduction. The MIEC, placed between the gas phase and the semiconductor light absorber, provides a facile path for minority carriers to reach the water vapor as well as a path for the ionic carriers to reach the solid electrolyte. Elevated temperature operation allows reasonable band misalignments at the interfaces to be overcome, reduces the required overpotential, and facilitates rapid product diffusion away from the surface. In this work, we simulate the behavior of an oxygen-ion-conducting photocathode in 1-D. Using the detailed-balance approach, in conjunction with recombination and electrochemical reaction rates, the practical efficiency is calculated as a function of temperature, solar flux, and select material properties. For a non-degenerate light absorber with a 2.0 eV band-gap and an uphill band offset of 0.3 eV, an efficiency of 17% and 11% is predicted at 723 and 873 K, respectively.