Over the past two years, the heat treatment of corundum involving lattice diffusion of beryllium (Be) at temperatures over 1800°C has become a major issue in the gem trade. Although initially only orange to orangy pink ("padparadscha"-like) sapphires were seen, it is now known that a full range of corundum colors, including yellow and blue as well as ruby, have been produced or altered by this treatment. An extension of the current understanding of the causes of color in corundum is presented to help explain the color modifications induced by Be diffusion. Empirical support is provided by Bediffusion experiments conducted on corundum from various geographic sources. Examination of hundreds of rough and faceted Be-diffused sapphires revealed that standard gemological testing will identify many of these treated corundums, although in some instances costly chemical analysis by mass spectrometry is required. Potential new methods are being investigated to provide additional identification aids, as major laboratories develop special nomenclature for describing this treatment.

Renewed interest in large-scale commercial mining of Montana sapphires motivated a detailed study of the heat treatment of sapphire from the Rock Creek deposit. During the course of this systematic study, over 75,000 stones were processed. It was found that approximately 65%-70% of the pale blue, pale green, and near-colorless sapphire could be converted to well-saturated blue and yellow colors. Some improvement in clarity was noted as well. Yellow hues were easily developed by heating in oxidizing atmospheres and were relatively insensitive t o time and temperature. Blue hues were developed by processing in reducing atmospheres. The relatively high iron content of Rock Creelz material restricts the range of reducing conditions that can be used to achieve optimal coloration because of hercynite precipitation in the sapphire,

No abstract

No abstract

The color of a gemstone is inextricably linked to its chemical composition, yet the quantitative relationship between color and chemistry is poorly understood in most cases. Here we use corundum to present a comprehensive quantitative description of the causes of color in a gem material and illustrate its predictive power. Natural corundum has six major chromophores that cause color: Cr 3+ , h • -Cr 3+ , Fe 3+ , h • -Fe 3+ , Fe 2+ -Ti 4+ , and V 3+ . We use synthetic samples doped with a single chromophore to study their light absorption behavior in isolation. Natural samples are used as well to study single chromophores, and we can subtract out the absorption of additional chromophores that might be present. Combining quantitative visible absorption spectroscopy with chemical analysis by SIMS, we are able to calculate the absorption cross section of each chromophore. The absorption cross section information is used to determine the depth of color that would occur in corundum of a given size (optical path length) containing a specific chromophore of a given concentration.

Laser-induced fusion has recently joined magnetic-confinement fusion as a prime prospect for generating controlled thermonuclear power. During the past three years, the Atomic Energy Commission has accelerated the national laser-fusion program more than tenfold, to about $30 million annually, and the Soviet Union has a program of comparable size.

No abstract

No abstract